Durometer PCE-2000N
US$ 1,177.00
ex. VAT, ex. delivery costs

The PCE Instruments PCE-2000N durometer uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories

Hardness Tester PCE-2000N
US$ 1,177.00
ex. VAT, ex. delivery costs
The PCE Instruments PCE-2000N hardness tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
Material Tester PCE-2000N
US$ 1,177.00
ex. VAT, ex. delivery costs
The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
Metal Hardness Tester PCE-2000N
US$ 1,177.00
ex. VAT, ex. delivery costs
The PCE Instruments PCE-2000N metal hardness tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
NDT Tester PCE-2000N
US$ 1,177.00
ex. VAT, ex. delivery costs
The PCE Instruments PCE-2000N NDT tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
Automotive Tester PCE-LES 308
US$ 1,176.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Automotive Tester allows you to set the flash frequency in both FPM and Hz. The Automotive Tester is pocket sized, small and also mains-independent thanks to the rechargeable battery.

  • bright 8 high power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 9150 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
Car Measuring Device PCE-LES 308
US$ 1,176.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Car Measuring Device allows you to set the flash frequency in both FPM and Hz. The Car Measuring Device is pocket sized, small and also mains-independent thanks to the rechargeable battery.

  • bright 8 high power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 9150 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
Checkweighing Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate
US$ 1,176.00
ex. VAT, ex. delivery costs
DAkkS-Calibration
With a resolution of 0.1 mg, this checkweighing scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the checkweighing scale. Typical areas of application for the checkweighing scale are therefore in laboratories or in research facilities.

  • Measuring range: 0 … 220 g
  • Resolution: 0.1 mg
  • Measurement accuracy: ±0.5 mg
  • Windbreak
  • RS232 data interface
  • incl. DAkkS Calibration Certificate
Condition Monitoring Stroboscope PCE-LES 308
US$ 1,176.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. The Condition Monitoring Stroboscope is pocket sized, small and also mains-independent thanks to the rechargeable battery.

  • bright 8 high power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 9150 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode