Material Tester PCE-CT 80-F5N3
US$ 1,185.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Material Tester PCE-2000N
US$ 1,177.00
ex. VAT, ex. delivery costs
The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
Material Tester PCE-CT 80-FN3
US$ 1,172.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Material Tester PCE-2550
US$ 1,168.00
ex. VAT, ex. delivery costs

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.4%, Repeatability: ± 0.6%
  • Impact Device: Type D
  • Measuring Direction: 360°
  • Internal measured value memory

Material Tester PCE-CT 80-FN2D5
US$ 1,161.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Material Tester PCE-CT 80-FN2
US$ 1,146.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Material Tester PCE-CT 80-FN1D5
US$ 1,132.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Material Hardness Tester for Metals PCE-2500N
US$ 1,128.00
ex. VAT, ex. delivery costs

PCE-2500N is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

  • Measuring principle: Leeb Rebound method
  • Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
  • Accuracy: ± 0.5%; Repeatability: ± 0.8%
  • Type D impact device

Material Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate
US$ 1,105.00
ex. VAT, ex. delivery costs
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
  • Accuracy after foil calibration: ±(1% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO Calibration Certificate