The flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The flow meter works according to the transit time difference method. The measuring principle of the flow meter is quite simple.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")20 …108 mm (approx. 0.8 … 4.2")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-HM and TDS-HS on rails

The flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The flow meter works according to the transit time difference method. The measuring principle of the flow meter is quite simple.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")20 …108 mm (approx. 0.8 … 4.2")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-HM and TDS-HS on rails
• Incl. ISO Calibration Certificate

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)
• Incl. sensors TDS-M1 and TDS-S1

PCE-TDS 100HSH-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)
• Incl. sensors TDS-M1 and TDS-S1
• Incl. ISO Calibration Certificate

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 … 28 in.  Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-M1

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 … 28 in.  Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-M1
• Incl. ISO Calibration Certificate

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)
• Incl. sensors TDS-S1
• Incl. ISO Calibration Certificate

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

This flow meter is very economical. With this flow meter you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

This anemometer is very economical. With this anemometer you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

Flow meter with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement

The Flow Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Flow Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The PCE-HVAC 2 is a Flow Meter that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile Flow Meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter
• Includes ISO calibration certificate