Products for 'Vibrasyon Ölçer PCE VM 40C '

US$ 904.00

ex. VAT, ex. delivery costs

The force gage is suitable for panel mounting. This force gage can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gage.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display

Force Gage PCE-DFG N 20K-ICA incl. ISO Calibration Certificate

US$ 1,847.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG N 20K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 20 kN / 20,000 N
- Resolution: 0.002 kN / 2 N
- Accuracy: ± 0.2% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate

Dynamometer PCE-DFG 1000 X

US$ 1,093.00

ex. VAT, ex. delivery costs

The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

- Measuring range: 0 ... 1000 N

- Resolution: 0.5 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Dynamometer PCE-DFG 500 X

US$ 1,055.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 500 N

- Resolution: 0.1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Force Gage PCE-DFG NF 0.5K-ICA incl. ISO Calibration Certificate

US$ 1,769.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 0.5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs

- Resolution: 0.05 N / 0.01 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG NF 1K-ICA incl. ISO Calibration Certificate

US$ 1,769.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 1K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the underside that allow a firm installation.

- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs

- Resolution: 0.1 N / 0.02 lbs

- Accuracy: ±0.5 % of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG NF 2K-ICA incl. ISO Calibration Certificate

US$ 1,769.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 2K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs

- Resolution: 0.2 N / 0.04 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG NF 5K-ICA incl. ISO Calibration Certificate

US$ 1,769.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG NF 5K-ICA with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.

- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs

- Resolution: 0.5 N / 0.1 lbs

- Accuracy: ± 0.5% of the measuring range

- Memory for 100 measurements

- USB interface

- Graphic display
- Incl. ISO calibration certificate

Dynamometer PCE-DFG 10 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 10 N

- Resolution: 0.005 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Dynamometer PCE-DFG 200 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 200 N

- Resolution: 0.1 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Dynamometer PCE-DFG 5 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 5 N

- Resolution: 0.001 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7,200 Hz

Dynamometer PCE-DFG 20 X

US$ 1,036.00

ex. VAT, ex. delivery costs

- Measuring range: 0 ... 20 N

- Resolution: 0.01 N

- Accuracy: ±0.05 % F.S.

- 32 GB memory for 30 million measuring points

- USB-C interface

- Graphic display

- Measuring rate: 1 ... 7200 Hz

Force Gage PCE-DFG N 5K-ICA incl. ISO Calibration Certificate

US$ 1,676.00

ex. VAT, ex. delivery costs

The force gage PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG N 1K-ICA incl. ISO Calibration Certificate

US$ 1,637.00

ex. VAT, ex. delivery costs

The PCE-DFG N 1K-ICA force gage measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-DFG N 2.5K-ICA incl. ISO Calibration Certificate

US$ 1,637.00

ex. VAT, ex. delivery costs

The PCE-DFG N 2.5K-ICA force gage measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate

Force Gage PCE-CS 5000N-ICA incl. ISO Calibration Certificate

US$ 1,135.00

ex. VAT, ex. delivery costs

PCE-CS 5000N-ICA is a digital battery-powered force gage that displays measurement values in kilograms (kg) or pounds (lbs). The force gage includes a hook, shackle, remote control and ISO calibration certificate.

- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Force Gage PCE-CS 3000N-ICA incl. ISO Calibration Certificate

US$ 1,114.00

ex. VAT, ex. delivery costs

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty force gage that displays measurement values in kilograms (kg) or pounds (lbs). The force gage includes a hook, shackle, remote control and ISO calibration certificate.

- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Force Gage PCE-DFG N 500

US$ 865.00

ex. VAT, ex. delivery costs

Force Gage PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gage for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N, 0 ... 112 lbs
- Accuracy: ± 0.1% of the measuring range of N, kg, lb, KPa
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips