The force gage PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.
- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs
- Resolution: 5 N / 1.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
The force gage PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.
- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
The force gage PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.
- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.
- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.
- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.
- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.00074 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.
- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 100 kN.
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 10,000 N.
The force gage PCE-DFG N 100K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.
- Measuring range: 0 ... 100 kN / 100,000 N - Resolution: 10 N - Accuracy: ± 1% of the measuring range - Memory for 100 measurements - USB interface - Graphic display
The PCE-DFG N 10K force gage measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.
- Measuring range: 0 ... 10,000 N / 0 ... 2,248 lbs
- Resolution: 5 N / 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 20 kN.
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.
The force gage PCE-DFG NF 10K-ICA with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.
- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
The force gage PCE-DFG NF 50K-ICA with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gage or the load cell has several threaded holes on the underside, which enable a fixed installation.
The force gage PCE-DFG N 20K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.
- Measuring range: 0 ... 20 kN / 20,000 N - Resolution: 0.002 kN / 2 N - Accuracy: ± 0.2% of the measuring range - Memory for 100 measurements - USB interface - Graphic display
The Force Gage PCE-DFG N 50K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.
- Measuring range: 0 ... 50 kN / 50,000 N - Resolution: 5 N - Accuracy: ± 0.2% of the measuring range - Memory for 100 measurements - USB interface - Graphic display
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 5,000 N.