Tri-Axial Accelerometer with Hand-Arm and Whole-Body Sensors PCE-VM 31-HAWB
US$ 6,740.00
ex. VAT, ex. delivery costs

The PCE-VM 31-HAWB Tri-Axial Accelerometer or Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.


  • Measuring of human vibration at the workplace
  • Velocity, acceleration, displacement
  • 3 channel FFT
  • TEDS support

Tri-Axial Accelerometer with Whole-Body Sensor PCE-VM 31-WB
US$ 4,884.00
ex. VAT, ex. delivery costs

The PCE-VM 31-WB Tri-Axial Accelerometer or Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


  • Measuring of human vibration at the workplace
  • Velocity, acceleration, displacement
  • 3 channel FFT
  • TEDS support
  • Includes whole-body sensor only - hand-arm sensor sold  separately (see accessories)

Tri-Axial Accelerometer with Hand-Arm Sensor PCE-VM 31-HA
US$ 4,609.00
ex. VAT, ex. delivery costs

The PCE-VM 31-HA Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


  • Measuring of human vibration at the workplace
  • Velocity, acceleration, displacement
  • 3 channel FFT
  • TEDS support
  • Includes hand-arm sensor only - whole-body sensor sold  separately (see accessories)

Tri-Axial Accelerometer without Sensors PCE-VM 31
US$ 2,648.00
ex. VAT, ex. delivery costs

The PCE-VM 31 Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


  • Measuring of human vibration at the workplace
  • Velocity, acceleration, displacement
  • 3 channel FFT
  • TEDS support
  • Sensors not included - sold separately (see accessories)

Accelerometer PCE-VM 5000
US$ 2,933.00
ex. VAT, ex. delivery costs

The 4-channel PCE-VM 5000 Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


  • 4 channels / inputs
  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity and displacement
  • Connection of up to 4 sensors simultaneously, 2 included
  • Data storage on SD card
  • Sampling rate: min. 1 sec.

Accelerometer PCE-VM 5000-ICA Incl. ISO Calibration Certificate
US$ 3,405.00
ex. VAT, ex. delivery costs
ISO Calibration

The 4-channel PCE-VM 5000-ICA Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


  • 4 channels / inputs
  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity, displacement
  • Connection of up to 4 sensors simultaneously, 2 included
  • Data storage on SD card
  • Sampling rate: minimum 1 sec.
  • Incl. ISO calibration certificate

Accelerometer PCE-VM 20
US$ 2,504.00
ex. VAT, ex. delivery costs
The accelerometer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

  • Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
  • Vibration speed: 0 … 200 mm/s, RMS
  • Vibration distance: 0 … 2000 μm, peak-peak
  • Real-time FFT analysis
  • Direct evaluation according to DIN ISO 10816
Accelerometer PCE-VM 20-ICA incl. ISO Calibration Certificate
US$ 2,728.00
ex. VAT, ex. delivery costs
ISO Calibration
The accelerometer PCE-VM 20-ICA is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

  • Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
  • Vibration speed: 0 … 200 mm/s, RMS
  • Vibration distance: 0 … 2000 μm, peak-peak
  • Real-time FFT analysis
  • Direct evaluation according to DIN ISO 10816
  • incl. ISO Calibration Certificate
Accelerometer PCE-VM 400B
US$ 6,930.00
ex. VAT, ex. delivery costs
Accelerometer / Vibration sensor is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The accelerometer / vibration sensor has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

  • 4 channels for measurement
  • Measurement on shafts, bearings, motors, generators
  • Piezoelectric acceleration sensors
  • Wide frequency range: 1 … 25000 Hz
  • Acceleration: 0.001 … 200 m/s²
  • Velocity: 0.001 … 200 mm/s
  • Balancing up to 8 correction planes
  • USB interface
  • 4 GB data storage
  • Evaluation according to ISO 10816