UCI Hardness Tester PCE-5000
US$ 7,797.00
ex. VAT, ex. delivery costs

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

  • Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
  • Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
  • Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
  • Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
  • Memory size: 1,000 groups for measurement data and 20 groups for calibration data
  • Different probe types (also automatic motorized probes) available

Hardness Tester PCE-3000ULS
US$ 4,871.00
ex. VAT, ex. delivery costs
The hardness tester can be used to quickly check the hardness of components even when installed. The hardness tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

  • Measurement according to UCI method and rebound method
  • Testing of HRC, HV, HB
  • Measuring direction 360 °
  • Large LCD
  • USB interface
  • incl. UCI probe & type D Leebsonde
Hardness Tester PCE-3000UL
US$ 4,574.00
ex. VAT, ex. delivery costs

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- 2 probes for UCI and Leeb rebound testing

 

Hardness Tester PCE-HT 225E
US$ 3,786.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a hardness test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Hardness Tester PCE-3000U
US$ 3,623.00
ex. VAT, ex. delivery costs

The UCI hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing or UCI 
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- One 50 N UCI probe included

 

Hardness Tester PCE-2900-ICA incl. ISO Calibration Certificate
US$ 3,432.00
ex. VAT, ex. delivery costs
ISO Calibration

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.5%, Repeatability: ± 0.6%
  • Impactor: Type D
  • USB and WiFi for data transmission
  • Incl. ISO Calibration Certificate

Hardness Tester PCE-2900
US$ 3,026.00
ex. VAT, ex. delivery costs

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.5%, Repeatability: ± 0.6%
  • Impactor: Type D
  • USB and WiFi for data transmission

Portable Metal Hardness Tester with ISO Certificate PCE-2600N-ICA
US$ 2,243.00
ex. VAT, ex. delivery costs
ISO Calibration

The Portable Metal Hardness Tester PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N-ICA to determine the surface hardness of many metals. The hardness tester PCE-2600N-ICA is especially suitable for quality or product inspection.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.5%, Repeatability: ± 0.8%
  • Impactor: DL
  • Display: 128 x 64 OLED
  • Includes ISO calibration certificate

Metal Hardness Tester with ISO Certificate PCE-950-ICA
US$ 1,980.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-950-ICA is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

  • Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA /19-655 HB / 80-976 HV / 32.2-115 HS 
  • Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
  • Accuracy: 2% / Repeatability: 2%
  • Impact device: Type D (integrated)
  • Data Analysis Software
  • For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
  • Includes ISO calibration certificate