The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

The radioactivity data logger measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the radioactivity data logger, the measured values can be sent in real time to a PC and analyzed with the included PC software.

• α-, β-, γ- and X-rays
• Bluetooth interface
• Internal memory
• PC software included

PCE-WB 20SD is a multifunction wet bulb temperature data logger used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data recording device is an ideal tool for evaluating heat stress risks in different work environments.

• Programmable WBGT alarm setting with audible and visual alerts
• Manual (push-button) or automatic (adjustable 1 … 3600 sec) sampling
• SD card memory (1 … 16 GB) allows for quick and easy data transfer to a PC

The air flow / temperature data logger measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow / temperature data logger can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

The Wind Speed Data Logger PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the wind speed data logger for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The wind speed data logger PCE-WL 1 helps you determine these profits.

- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.
- incl. ISO Calibration Certificate 

Data Logger with acoustic signal, internal memory and software.

• Measurement ranges: 0.01 µSv / h - 1000 µSv / h
• Radiation detector: Geiger-Muller counting tub
• Internal memory: 2 KB
• Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
• Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
• With additional alarm and acoustic pulse indicator

Data Logger with acoustic signal, internal memory and software.

• Measurement ranges: 0.01 µSv / h - 1000 µSv / h
• Radiation detector: Geiger-Muller counting tub
• Internal memory: 2 KB
• Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
• Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
• With additional alarm and acoustic pulse indicator

• Automatic range: 30 … 130 dB
• Manual range: 30 … 80 / 50 … 100 / 80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Memory capacity: 32700 values