Technical Support
Monday - Friday
9 am - 5 pm ET
(561) 320-9162
2-Year Warranty
All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects
Monday - Friday
9 am - 5 pm ET
(561) 320-9162
2-Year Warranty
All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects
The Data Logger PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the weather station for mobile applications. Since a wind turbine or wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The Data Logger PCE-WL1 helps you determine these profits. These logging test instruments are manufacturer calibrated. An ISO calibration certificate is an option.
- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.
ex. VAT, ex. delivery costs
The Multi Channel Data Logger PCE-KD9 can be applied to either capture, visualize, save or control measuring data and processes. This multi channel data logger is a device for universal application based on Linux operating systems. Through three slots, each with inputs, the multi channel data logger can be equipped with up to 72 analogue inputs, 72 binary inputs, 36 TC inputs (e.g. type K thermal element), 18 RTD inputs (e.g. PT100 probes), 36 relay / SSR- inputs or 24 analogue outputs.
- Max. 72 analogue and binary inputs
- Graphics-capable 5.7" TFT display with touch screen
- Transmitter power supply 24 V DC / 200 mA
- 8 integrated PID controllers
- Interface RS485 / Modbus RTU
- Dimensions: 144 x 144 mm
Note: This item must be configured before ordering!
ex. VAT, ex. delivery costs
Data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.
- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current: 0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
PCE-VDR 10 is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble with control systems.
- Acceleration measuring range:
0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges:
0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface
ex. VAT, ex. delivery costs
The Wind Speed Data Logger PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the wind speed data logger for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The wind speed data logger PCE-WL 1 helps you determine these profits.
- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.
- incl. ISO Calibration Certificate
ex. VAT, ex. delivery costs
PCE-NDL 10 is a high-quality class 2 sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory or an SD card (SD card included). These sound logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.
- Measuring range:
30 ... 130 dB (SPL) / 70 ... 130 dB (dose)
- Accuracy: ± 3.5 dB (31.5 Hz) ... ± 5.6 dB (8000 Hz)
- Data logging: Manual or adjustable automatic
- Sampling rate: Approx. 1 second
- Frequency weighting: A and C
ex. VAT, ex. delivery costs
The data logger PCE-KD3 was developed to measure and record measured values of standard analog signals or temperature sensors. In addition, the data logger PCE-KD3 can visualize the measured values graphically. The PCE-KD3 is optionally equipped with 1, 4 or 8 measuring channels.
- Analog inputs: 4 ... 20-mA / 0 ... 10V, RTD / TC (selectable)
- Digital input: 24V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)
Note: This item must be configured before ordering!
ex. VAT, ex. delivery costs
PCE-KD3-WGH is an eight channel data logger or display recorder designed to record analog measurements of 4 ... 20 mA sensors or RTD (PT100, PT500 and PT1000) temperature sensors. In addition, PCE-KD3-WGH is a multichannel universal indicator that visualizes readings graphically on its LCD screen. The instrument can be mounted on a wall via its IP65-protected housing.
- Analog inputs: 4 ... 20 mA, RTD (selectable)
- Digital input: 24 V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)
- Memory: 8 MB, approx. 2 million readings
ex. VAT, ex. delivery costs
The data logger PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this data logger in the range between -100 ... 2000 kPa. The data logger PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.
- Measuring range pressure: -100 ... 2000 kPa relative / -14.5 ... 290 PSI
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
PCE-KD5 is a display recorder or data logger for the capturing, monitoring and controlling of process parameters. The data logger is based on a Linux operating system and has three slots that can be equipped with several different inputs and outputs. Depending on your specific needs, it is possible to equip the PCE-KD5 data logger with up to 48 analog or binary inputs, 24 thermocouple inputs, 12 resistance temperature detector (RTD) inputs, 16 relays / solid state relays (SSRs) or 8 analog outputs.
- Up to 48 analog or binary inputs
- Up to 24 thermocouple inputs
- Up to 12 inputs for RTDs
- Up to 16 relays / SSRs
- Maximum sampling rate of 10 Hz
- 1.5 GB internal memory
**Not eligible for 30-day return policy due to custom configuration**
ex. VAT, ex. delivery costs
The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit.
- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ...
200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7
- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case
ex. VAT, ex. delivery costs
The PCE-JR-911 Data Logger is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Data Logger comes complete with a Data Logger, allowing the user to program specific time intervals for taking measurements, such as over an entire week.
This kind of temperature logging testers is manufacturer calibrated and the ISO certificate is delivery included.
- Non-Contact temperature measurement (infrared)
- Sampling rate: 1/ sec.
- Memory size: 12,000 values
- Adjustable date and time
- Printer, memory, data Logger integrated
- Incl. ISO calibration certificate
ex. VAT, ex. delivery costs
The Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Data Logger with microprocessor is ideal for use with various Pt100 sensors. The temperature logging test instruments are manufacturer calibrated (ISO calibration certificate is included).
- High precision: ±2% r.H.
- 1 channel temperature Recorder
- Automatic shutdown
- Memory size: 5,000 values
- Sampling rate: 2/sec.
- Incl. ISO calibration certificate
ex. VAT, ex. delivery costs
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
ex. VAT, ex. delivery costs
Data Logger with acoustic signal, internal memory and software.
- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator
ex. VAT, ex. delivery costs
The PCE-PHD 1-ICA pH / Conductivity / Salt / Oxygen Water Quality Data Logger is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the data logger is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.
- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included
- incl. ISO Calibration Certificate
ex. VAT, ex. delivery costs
The Dissolved Oxygen Data-Logging Meter PCE-PHD 1-O2 is a true all-rounder for checking the water quality. The portable oxygen meter is used to control the water parameters pH (optional), temperature (optional), conductivity (optional), salinity (optional) and oxygen.
- Oxygen: 0 ... 20 mg / l
- Real-time data logger
- SD card memory (16 GB max.)
- Manual or automatic temperature compensation
- BNC connector
- Suitable for laboratory and on-site measurement
- Electrode for oxygen included
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
