Paint Gauge Navigation
Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Products for 'Wind Measurer PCE 423 '
Paint Thickness Tester PCE-TG 150 HT
US$ 1,254.00
ex. VAT, ex. delivery costs
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ...  662 °F
Details
Paint Thickness Tester PCE-TG 300-NO5/90
US$ 1,319.00
ex. VAT, ex. delivery costs
Wireless

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

Details
Paint Thickness Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
US$ 1,478.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Details
Coating Thickness Gauge PCE-CT 80HP-F5N3
US$ 1,318.00
ex. VAT, ex. delivery costs
The paint gauge can reliably determine the thicknessHigh Accuracy of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the paint gauge covers a wide range of measuring tasks.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(1.5 % of measured value + 1 µm)
- Data memory for 2000 readings
- Fe substrates such as: steel and iron
- NFe substances such as: aluminum and copper
- Practical V-groove on the measuring heads
Details
Paint Gauge PCE-CT 80-FN3
US$ 1,161.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Gauge PCE-CT 80-FN2
US$ 1,135.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Gauge PCE-CT 80-FN1D5
US$ 1,122.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate
US$ 1,413.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness gauge.

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ...  662 °F
- incl. ISO Calibration Certificate
Details
Paint Thickness Tester PCE-TG 150 HT-ICA incl. ISO Calibration Certificate
US$ 1,413.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ...  662 °F
- incl. ISO Calibration Certificate
Details
Paint Gauge PCE-CT 80-F5N3
US$ 1,174.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Gauge PCE-CT 80-FN2D5
US$ 1,155.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Gauge PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
US$ 1,313.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate
Details
Paint Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
US$ 1,366.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.


- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate 

Details
Paint Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
US$ 1,353.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Details
Paint Gauge PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
US$ 1,346.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Details
Paint Gauge PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
US$ 1,326.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Details
Paint Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Thickness Gauge PCE-TG 150A-ICA incl. ISO calibration certificate
US$ 1,011.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the paint thickness gauge.

- Measuring range: 1.00 ... 300.0 mm
- Resolution: 0.01 mm at ≤99.99 mm
- Accuracy: ±0.5 % of Mw. + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- incl. ISO calibration certificate
Details