Paint Thickness Tester PCE-TG 150 HT-ICA incl. ISO Calibration Certificate
US$ 1,413.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C / 14 …  662 °F
  • incl. ISO Calibration Certificate
Paint Thickness Tester PCE-TG 300-NO2
US$ 1,399.00
ex. VAT, ex. delivery costs
Wireless

The PCE-TG 300-NO2 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
  • Diameter: 14 mm / 0.55"
  • Minimum diameter of pipes: 30 mm / 1.18"
  • Frequency: 2.5 MHz
  • Bluetooth

Paint Thickness Tester PCE-TG 300-NO7
US$ 1,392.00
ex. VAT, ex. delivery costs
Wireless

The PCE-TG 300-NO7 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
  • Diameter: 6 mm / 0.23"
  • Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
  • Frequency: 7 MHz
  • Bluetooth

Paint Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
US$ 1,366.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.


  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate

Paint Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
US$ 1,353.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Paint Gauge PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
US$ 1,346.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-TG 300-NO5
US$ 1,346.00
ex. VAT, ex. delivery costs
Wireless

The PCE-TG 300-NO5 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth

Paint Gauge PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
US$ 1,326.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-TG 300-NO5/90
US$ 1,319.00
ex. VAT, ex. delivery costs
Wireless

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth

Coating Thickness Gauge PCE-CT 80HP-F5N3
US$ 1,318.00
ex. VAT, ex. delivery costs
The paint gauge can reliably determine the thicknessHigh Accuracy of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the paint gauge covers a wide range of measuring tasks.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(1.5 % of measured value + 1 µm)
  • Data memory for 2000 readings
  • Fe substrates such as: steel and iron
  • NFe substances such as: aluminum and copper
  • Practical V-groove on the measuring heads
Paint Gauge PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
US$ 1,313.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO Calibration Certificate
Paint Thickness Gauge PCE-TG 150 HT
US$ 1,254.00
ex. VAT, ex. delivery costs
The paint thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness gauge.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C / 14 …  662 °F
Paint Thickness Gauge PCE-TG 150A HT
US$ 1,254.00
ex. VAT, ex. delivery costs
The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

  • Measuring range (with sensor): 1.20 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of the weight. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C
Paint Thickness Tester PCE-TG 150 HT
US$ 1,254.00
ex. VAT, ex. delivery costs
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C / 14 …  662 °F
Paint Gauge PCE-CT 80-F5N3
US$ 1,174.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Paint Gauge PCE-CT 80-FN3
US$ 1,161.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Paint Gauge PCE-CT 80-FN2D5
US$ 1,155.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Paint Gauge PCE-CT 80-FN2
US$ 1,135.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"