- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate

The HVAC meter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, an HVAC meter must be connected in series to the load.

Measuring function
- AC current
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
- incl. ISO Calibration Certificate

- AC / DC current, AC voltage and frequency measurement
- Integrated measuring point illumination
- Non-contact voltage tester
- Automatic range selection
- Forceps opening: 18 mm
- Automatic switch-off
- Incl. ISO calibration certificate

PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.

- Adjustable high/low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

PCE-HVAC 3 is a multifunction HVAC meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

The HVAC meter has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the HVAC meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface

The HVAC meter is an independent measuring device for determining temperatures between -40 ... 125 °C. The HVAC meter is therefore particularly suitable for monitoring particularly hot environments.

- Measuring range: -40 ... 125 °C / -40 ... 257 °F
- Measurement accuracy: ± 0.2 °C (0 ... +65 °C / 32 ... 149 °F)
- Resolution: 0.1 °C
- USB data logger
- Data export directly as PDF

PCE-910 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

- Measuring range: 1.2 ... 30.0 m (3.9 ... 98.4 ft) / sec.
- Resolution: 0.01 m (0.03 ft) / s
- Measurement accuracy m / s: ± (3% + 0.20 m (0.7 ft) / s)
- Units selectable: km / h, knots, miles / h, ft / min
- Memory: for up to 60000 readings
- PC software

- Altimeter up to 9,000 m / 29,527 ft
- Air pressure (absolute)
- Wind speed

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

The HVAC meter has a measuring range of -80 … +70 °C. The HVAC meter is therefore suitable for monitoring particularly cold environments.

- Measuring range: -80 ... +70 °C / -112 ... +158 °F
- Measurement accuracy: ± 0.5 °C (-30 ... +70 °C / -22 ... +158 °F)
- Resolution: 0.1 °C
- USB data logger for dry ice
- Data export directly as PDF

Without a doubt, the main advantage of this handheld cup vane HVAC Meter is that it doesn't need to be held exactly in the direction of the wind. HVAC Meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane HVAC Meter, wind direction will not influence the measurement.

- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

The HVAC meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the HVAC meter, or you can use the integrated clamp mechanism. By using the clamp of the HVAC meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.

- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

PCE-PCM 1 is a multipurpose HVAC meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

The HVAC Meter PCE-779N measures temperatures quickly and without contact. The HVAC Meter can be used for almost all surfaces. The emissivity of the HVAC Meter is adjustable over the range of 0.1 ... 1.0. The HVAC Meter has various measurement functions such as max, min and average measurement.

- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F

- Up to 15 gases
- For flammable gases
- 500 mm / 19.6" sensor
- Visual, audible and haptic alarm