Order no.: PCE-P50
The HVAC Meter PCE-P50 Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 3
With the HVAC meter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the HVAC meter. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Manufacturer: PCE Instruments
US$ 247.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HVAC 3S
The HVACR tester PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the HVACR tester also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
Manufacturer: PCE Instruments
US$ 245.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3-ICA
This HVAC meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this HVAC meter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 243.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
US$ 242.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-OCM 10
The HVAC meter PCE-OCM 10 is characterized by the OLED display. The OLED display on this HVAC meter allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
US$ 240.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HT110

The PCE-HT110 HVAC Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

Manufacturer: PCE Instruments
US$ 235.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-THB 40
The HVAC meter records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges
- Temperature: 0 ... 50 °C /  32 ... 122 °F
- Relative humidity: 10 ... 90% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar)
- Selectable pressure unit: hPa, mmHg and inHg
- Real-time data storage
Manufacturer: PCE Instruments
US$ 235.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670-ICA
HVAC meter PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 HVAC meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 234.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC2-ICA

HVAC meter for measuring AC/DC current, AC voltage and resistance. This HVAC meter is designed to indirectly detect AC/DC current and ohms. The HVAC meter has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The HVAC meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 231.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HT 72-ICA
The temperature / humidity HVAC meter is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity HVAC meter is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

- Measuring range temp.: -30 ... 60 °C / -22 ... 140 °F
- Measuring range rel. humidity: 0 ... 100% RH
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T312N-ICA
This HVAC meter is a two-channel measuring instrument. The HVAC meter offers a wide range of measurement options.

- K-type thermometer with dual input
- Temperature range: -210 ... 1372 °C / -346 ... 2501 °F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-P15
The HVAC Meter PCE-P15 Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 1000mbar / ± 15 psi
- Resolution: 1mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
Manufacturer: PCE Instruments
US$ 222.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-P30
The HVAC Meter PCE-P30 Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 2000mbar / ± 30 psi
- Resolution: 2mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
Manufacturer: PCE Instruments
US$ 222.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 5-ICA
The HVAC meter is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the HVAC meter covers a large range of current measurements.

Measurement function:
- AC current
- DC current
- DC voltage
- AC voltage
- LowZ AC/DC
- Resistance
- Continuity test
- Diode test
- Capacitances
- Temperature (type K)
- Frequency (with current clamp)
- Frequency (with voltage measurement)
- Frequency (direct measurement)
- Duty cycle
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-777N-ICA
The HVAC meter measures the temperature of surfaces non-destructively and from a greater distance using an infrared beam. This lightweight infrared HVAC meter is characterized by the simplest operation and the red sighting aid.

- Temperature measuring range: -30 ... +260 °C / -22 ... 500 °F
- Measuring spot (measuring distance to measuring spot size): 8:1
- Resolution: 0.1 °C
- Measured value display either in °C or °F
- Fixed emissivity
- Measuring spot ratio 8:1
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 216.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-EM 888
The multifunction HVAC meter PCE-EM 888 enables you to precisely measure the most important environmental conditions. Due to its dimensions and low weight, this multifunction HVAC meter is a real mobile weather station and can be used anywhere. With just one push of a button, all weather information is displayed as a numerical value.

- Measurement ranges:
- Wind speed: 1.4 ... 108 km/h / 0.9 ... 67 mph
- Volume flow: max. 54000 CMM
- Humidity: 10 ... 95% r.h.
- Air temperature: 0 ... 50 °C / 32 ... 122°F
- Temperature with Type K: -100 ... 1300 °C / -148 ... 2372°F
- Illumination: 0 ... 2000 lux
Manufacturer: PCE Instruments
US$ 216.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-HT 70-ICA
The HVAC meter records the air temperature and humidity and stores them internally. The compact HVAC meter with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses...)

- Measuring range temperature: -40 ... 85 °C / -40 ... 185 °F
- Measuring range rel. humidity: 0 ... 100%
- Max. 16,000 data records can be saved
- Export to software possible
- 450 day running time
- Adjustable storage rate from 1 second
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
US$ 210.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T 330
The HVAC meter has two measuring inputs. Each measuring input from the HVAC meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the HVAC meter shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
Manufacturer: PCE Instruments
US$ 210.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T 318

PCE-T 318 is an HVAC temperature meter or digital contact thermometer used to measure temperature in laboratory, industrial and heating, ventilation, air conditioning and refrigeration (HVACR) systems and applications. Compatible with IEC751 PT100, PT500 and PT1000 sensors, this platinum resistance temperature detector (RTD) thermometer includes 1 x 4-wire PT100 class A sensor in the delivery contents. Additional sensors sold separately.

 

- Measuring range: -100 ... 300°C / -148 ... 572°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± (0.1% of reading + 0.4°C / 0.72°F)

Manufacturer: PCE Instruments
US$ 209.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer