Environmental Tester PCE-AQD 50A-ICA incl. ISO-Calibration Certificate
US$ 660.00
ex. VAT, ex. delivery costs
ISO Calibration
The Environmental Tester is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Environmental Tester is equipped with various sensors.
Parameters / Measuring ranges:

  • Temperature: 0 ... +50 ºC / 32 ... 122 ºF
  • Ambient humidity: 0 ... 100% RH
  • Atmospheric pressure: 300 ... 2000 hPa
  • CO2: 0 ... 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months
  • incl. ISO-Calibration Certificate
Environmental Tester PCE-HVAC 2-ICA with ISO Certificate
US$ 660.00
ex. VAT, ex. delivery costs
ISO Calibration

The environmental tester with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile environmental tester. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-


  • Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
  • Zero, minimum, maximum, average, record and hold functions
  • Stores to memory up to 99 measurement values per parameter
  • Includes ISO calibration certificate

Environmental Tester Gamma-Scout GS-Rechargeable
US$ 646.00
ex. VAT, ex. delivery costs

The environmental tester is a professional radiation meter for the very precise detection of alpha, beta and gamma radiation. This environmental tester has a large measuring range and can be used for sporadic on-site measurements or for long-term measurements or monitoring.

  • Ranges: 0.01µSv/h…1000µSv/h
  • Detector: Geiger-Müller counter tube
  • Memory: 2kB
  • Including software, data cable and certificate
  • Rechargeable battery as a power source that is charged via USB (mains adapter or PC).

Environmental Tester PCE-P05 Differential Pressure + ISO calibration certificate
US$ 643.00
ex. VAT, ex. delivery costs
ISO Calibration
The environmental tester is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The environmental differential pressure tester is particularly suitable for the complete documentation of your measuring tasks.

  • Measuring range from -344 … +344 mbar
  • Parameters:
    inH2O, psi, mbar, kPa, inHg, mmHg,
       ozin², ftH2O, cmH2O, kgcm², bar
  • Backlight can be switched on/off
  • Software with USB cable included
  • Incl. ISO calibration certificate
Environmental Tester PCE-PHD 1-ICA incl. ISO Calibration Certificate
US$ 643.00
ex. VAT, ex. delivery costs
ISO Calibration

The environmental tester is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the environmental tester is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


  • Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
  • Automatic temperature compensation
  • Sampling rate of 1 sec.
  • SD card memory (16 GB max.)
  • Interface: RS-232
  • 3 point calibration
  • Electrodes for pH and conductivity included
  • incl. ISO Calibration Certificate
Environmental Tester PCE-PH20M-ICA incl. ISO calibration certificate
US$ 633.00
ex. VAT, ex. delivery costs
ISO Calibration

The environmental tester is a useful handheld pH meter for food. The pH can be read off the large LCD display. pH measurement in foodstuffs production and processing is a ubiquitous method of measurement. It is needed in many downstream process steps and has a direct influence on the tactile, sensory and hygienic quality of foodstuffs.

  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Waterproof (IP 67)
  • Data-Hold function
  • Calibration: automatic, pH 4, 7, or 10
  • Food: Meat etc.
  • Including ISO calibration certificate

Environmental Tester PCE-HPT 1
US$ 630.00
ex. VAT, ex. delivery costs

The environmental tester with microprocessor is a high precision 1-channel temperature gauge. The environmental tester with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.


  • 1 channel temperature recorder
  • Automatic shutdown
  • High accuracy of ± 2 % r.H.
  • Sampling rate of 2 / sec
  • Memory size: 5,000 values

Environmental Tester CWR 1
US$ 628.00
ex. VAT, ex. delivery costs

Compact environmental tester for weather monitoring. Basic environmental tester with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 360°
  • Output signal: 4 … 20 mA
  • Assembly: pipe assembly / assembly via PG screw connection
  • Heating: yes

Environmental Tester PCE-VA 20-ICA incl. ISO Calibration Certificate
US$ 628.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-VA 20 is a versatile environmental tester for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This environmental tester device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±  (3% of measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1
  • Incl. ISO Calibration Certificate