Order no.: PCE-CSM 21
PCE-CSM 21 is a handheld spectrophotometer used for high-quality color measurement. Featuring a custom 4 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 21 offers a long battery life, a 9-color lamp and an easy-to-use portable design. The PCE-CSM 21 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light sources: D65, A, C, D50, D55, D75, F2, F7, F11
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
Manufacturer: PCE Instruments
US$ 6,489.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 35EU
The environmental air quality meter PCE-PQC 35EU is characterized by its small size and easy wall mounting. The fixed installation of the environmental air quality meter ensures high-precision air quality studies.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- PID Sensor: 0 ... 50 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
US$ 6,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 35US
The dust measuring device PCE-PQC 35US is the most advanced dust measuring device on the market. This dust measuring device PCE-PQC 35US stores up to 45,000 measured values ​​with time stamp.

- Wall Mount Particle Counter with C02 & PID Sensor
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921


Manufacturer: PCE Instruments
US$ 6,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 35EU
The environmental dust monitor PCE-PQC 35EU is characterized by its small size and easy wall mounting. The fixed installation of the environmental dust monitor ensures high-precision air quality studies.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- CO2 Sensor: 0 ... 5000 ppm
- PID Sensor: 0 ... 50 ppm
- Ethernet, USB
- Includes temperature and humidity sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
US$ 6,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 35US
The dust monitor PCE-PQC 35US is the most advanced dust monitor on the market. This dust monitor PCE-PQC 35US stores up to 45,000 measured values ​​with time stamp.

- Wall Mount Particle Counter with C02 & PID Sensor
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA


Manufacturer: PCE Instruments
US$ 6,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 35US
The particle counter PCE-PQC 35US is the most advanced particle counter on the market. This particle counter PCE-PQC 35US stores up to 45,000 measured values ​​with time stamp.

- Wall Mount Particle Counter with C02 & PID Sensor
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA


Manufacturer: PCE Instruments
US$ 6,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

- Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
US$ 6,169.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use real-time measurement of percent moisture measurement of bulk materials. Material in flowing mass, such as granular materials, sand, sawdust, fly ash (mineral), wood chips (surface to 5 cm), grain, powders, seed, and pastes is continuously measurable. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. 

 

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

 

Manufacturer: PCE Instruments
US$ 6,169.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this humidity sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
US$ 6,169.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
US$ 6,169.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in moisture measurement of various bulk materials, these moisture analyzing test instruments are installed in bins, silos, troughs, bunkers, distributors, augers, and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
US$ 6,169.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: VM-250.1

VM-250.1 is a portable, ATEX-approved viscometer used primarily in the petroleum / petrochemical, food and beverage, transportation and marine industries for in-tank, dynamic viscosity measurements up to 6 m / 19.7 ft deep. Featuring automatic temperature compensation and requiring no sample preparation whatsoever, this handheld viscometer allows for direct, dynamic viscosity measurement using the included probe and displays results in millipascal-second (mPa.s).


- Allows for direct, dynamic viscosity measurement
- Viscosity range: 1 ... 2,000 mPa.s / cP
- Accuracy: ±1 % reading (RD)

 

Manufacturer: LEMIS Baltic
US$ 6,144.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: 100100

100100 RM 100p is a portable rotational viscometer used in industrial and research applications to measure liquid viscosity in accordance with ASTM / ISO 2555, DIN / ISO 3219 and MSR 1 to 5. Featuring a built-in PT100 temperature sensor, serial and USB interfaces and an easy-to-read LCD screen, this handheld viscometer displays measurements in pascal-second (Pa.s).


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 40, 50, 60,
  100, 200, 250, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300,
  1400, 1500 rpm

- Viscosity range: 20 ... 510,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: LAMYRHEOLOGY
US$ 6,140.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TT 100
The light meter PCE-TT 100 is used to measure the transmission of visible light and UV light. For this purpose, the light meter uses a light source and a spectrophotometric sensor. Essentially, the light meter is used to measure the transmission of light through lenses, sunglasses, glass, plastic, and all other translucent materials.

- Wavelength in the measuring range: 300 ... 1100 nm
- Specific wavelength transmission
- Average transmission of visible light
- Visible smoothing of the light
- Visual color deviation
- Color (LAB), color (△ E)
- Yellowness index
- USB interface with Windows software
Manufacturer: PCE Instruments
US$ 6,119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TT 100
The light transmission meter PCE-TT 100 is used to measure the transmission of visible light and UV light. For this purpose, the light transmission meter uses a light source and a spectrophotometric sensor. Essentially, the light transmission meter is used to measure the transmission of light through lenses, sunglasses, glass, plastics, and all other translucent materials.

- Wavelength in the measuring range: 300 ... 1100 nm
- Specific wavelength transmission
- Average transmission of visible light
- Visible smoothing of the light
- Visual color deviation
- Color (LAB), color (△ E)
- Yellowness index
- USB interface with Windows software
Manufacturer: PCE Instruments
US$ 6,119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 10

The color meter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10nm wavelength increments with Reflectance Curve graph. 


- CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
US$ 6,118.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 10

The colorimeter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
US$ 6,118.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 10

The spectrophotometer PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
US$ 6,118.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 10

The colorimeter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
US$ 6,118.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-432-EKIT-ICA

The Class 1 outdoor construction noise meter kit PCE-432-EKIT can be used, e.g., for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The outdoor construction noise meter kit is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 6,076.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer