Order no.: PCE-VE 800N4
The snake camera has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this snake camera. The camera head of this snake camera can move freely in 4 directions.

- Cable / head diameter: 2.8 mm
- Direction of movement camera head: 4-way
- Camera head length: 8 mm
- Bending radius: 7 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP58 camera cable
- 400 x 400 pixel image resolution
Manufacturer: PCE Instruments
US$ 8,621.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 800N4
The videoscope has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this videoscope. The camera head of this videoscope can move freely in 4 directions.

- Cable / head diameter: 2.8 mm
- Direction of movement camera head: 4-way
- Camera head length: 8 mm
- Bending radius: 7 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP58 camera cable
- 400 x 400 pixel image resolution
Manufacturer: PCE Instruments
US$ 8,621.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 30
This very accurate tabletop color meter is intended for laboratory use to perform measurements on liquids, paper, textiles or other reference samples. This spectrophotometer uses both transmission and reflectance to accurately measure liquids, solids, and pastes.

Chromaticity for spectral reflection:  Φ 25.4 mm / SCI, standard deviation ΔE*ab 0.02
Chromaticity for spectral transmittance:  Φ 25.4 mm / SCI, standard deviation ΔE*ab 0.02

- Color touchscreen
- 256 Pixel CMOS sphere-type Image Sensor
- Data storage: 2000 Standards, 20,000 Samples
- Menu languages: English, Chinese
- Single and average measurements
- Data interface: USB
- Device software included
Manufacturer: PCE Instruments
US$ 8,032.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 30
This very accurate tabletop colorimeter is intended for laboratory use to perform measurements on liquids, paper, textiles or other reference samples. This spectrophotometer uses both transmission and reflectance to accurately measure liquids, solids, and pastes.

Chromaticity for spectral reflection:  Φ 25.4 mm / SCI, standard deviation ΔE*ab 0.02
Chromaticity for spectral transmittance:  Φ 25.4 mm / SCI, standard deviation ΔE*ab 0.02

- Color touchscreen
- 256 Pixel CMOS sphere-type Image Sensor
- Data storage: 2000 Standards, 20,000 Samples
- Menu languages: English, Chinese
- Single and average measurements
- Data interface: USB
- Device software included
Manufacturer: PCE Instruments
US$ 8,032.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 30
This very accurate tabletop spectrophotometer is intended for laboratory use to perform measurements on liquids, paper, textiles or other reference samples. This spectrophotometer uses both transmission and reflectance to accurately measure liquids, solids, and pastes.

Chromaticity for spectral reflection:  Φ 25.4 mm / SCI, standard deviation ΔE*ab 0.02
Chromaticity for spectral transmittance:  Φ 25.4 mm / SCI, standard deviation ΔE*ab 0.02

- Color touchscreen
- 256 Pixel CMOS sphere-type Image Sensor
- Data storage: 2000 Standards, 20,000 Samples
- Menu languages: English, Chinese
- Single and average measurements
- Data interface: USB
- Device software included
Manufacturer: PCE Instruments
US$ 8,032.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MFI 400
The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Manufacturer: PCE Instruments
US$ 8,028.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MFI 400
The material flow tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Manufacturer: PCE Instruments
US$ 8,028.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 22
PCE-CSM 22 is a handheld spectrophotometer color meter used for high-quality color measurement. Featuring a dual aperture 8 mm and 4 mm, and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 22 offers a long battery life, a 18-color lamp with UV light, and an easy-to-use portable design. The PCE-CSM 22 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Illuminant: D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
- Combined LED and UV light
Manufacturer: PCE Instruments
US$ 7,818.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 22
PCE-CSM 22 is a handheld spectrophotometer colorimeter used for high-quality color measurement. Featuring a dual aperture 8 mm and 4 mm, and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 22 offers a long battery life, a 18-color lamp with UV light, and an easy-to-use portable design. The PCE-CSM 22 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Illuminant: D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
- Combined LED and UV light
Manufacturer: PCE Instruments
US$ 7,818.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 22
PCE-CSM 22 is a handheld spectrophotometer used for high-quality color measurement. Featuring a dual aperture 8 mm and 4 mm, and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 22 offers a long battery life, a 18-color lamp with UV light, and an easy-to-use portable design. The PCE-CSM 22 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Illuminant: D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
- Combined LED and UV light
Manufacturer: PCE Instruments
US$ 7,818.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-A-315

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

Manufacturer: PCE Instruments
US$ 7,416.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-A-315

The PCE-A-315 inline or in-process moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

Manufacturer: PCE Instruments
US$ 7,416.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-A-315

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture
  content during continuous mass flow
with an error of just ±0.5%
  from 5% to 18% grain moisture
- Lowers energy costs by enabling shorter drying times and
  reduces labor costs by automating the moisture monitoring
  process
- Provides nearly maintenance-free operation, delivering
  consistently accurate moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control


Manufacturer: PCE Instruments
US$ 7,416.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-A-315

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5 to 55 °C / 41 to 131 °F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

Manufacturer: PCE Instruments
US$ 7,416.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)

 

Manufacturer: PCE Instruments
US$ 7,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture analyzers for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
US$ 7,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture meter for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture meter for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
US$ 7,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ = 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
US$ 7,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this absolute moisture sensor can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)

- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
US$ 6,674.40

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this bulk material moisture analyser can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
US$ 6,674.40

ex. VAT, ex. delivery costs

Test Instruments manufacturer