Order no.: PCE-PQC 14US

The dust monitor PCE-PQC 14US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-55 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 14US

The particle counter PCE-PQC 14US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-55 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive surface testing - conductivity meter for metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 50

The PCE-DDM 50 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
US$ 4,251.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IDM 3D
The 3D digital microscope PCE-IDM 3D is a microscope with its own user interface, in which various analysis functions are available. The live image and the user interface are transmitted together via the VGA connection to the 3D digital microscope PCE-IDM 3D to a connected monitor.

- 3D rotation 360°
- Lens magnification: 0.3 ... 2.2 times
- Picture format 1920 x 1080 Full HD
- Focusing range 250 mm / 9.8 in
Manufacturer: PCE Instruments
US$ 4,197.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IDM 3D
The 3D inspection camera PCE-IDM 3D is a microscope with its own user interface, in which various analysis functions are available. The live image and the user interface are transmitted together via the VGA connection to the 3D inspection camera PCE-IDM 3D to a connected monitor.

- 3D rotation 360°
- Lens magnification: 0.3 ... 2.2 times
- Picture format 1920 x 1080 Full HD
- Focusing range 250 mm / 9.8 in
Manufacturer: PCE Instruments
US$ 4,197.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MCWHU25

The PCE-MCWHU25 Hanging Scales have a high weight range of up to 25 t and a resolution of 5 kg. The housing of the hanging scales has an IP 67 protection. The digit height is 40 mm / 1.6 in, and thanks to the display's high contrast it is easy to read. The included remote control can control the hanging scales at a maximum distance of 8 m / 26 ft.


- Capacity [Max]: 25000 kg
- Readability [d]: 5 kg
- Capacity [Min]: 200 kg

Manufacturer: Dini Argeo GmbH
US$ 4,177.45

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 20US
The dust measuring device PCE-PQC 20US is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the dust measuring device PCE-PQC 20US can be read out and processed via the supplied software via Ethernet, USB or Wifi.
 

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,095.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 20US
The dust monitor PCE-PQC 20US is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the dust monitor PCE-PQC 20US can be read out and processed via the supplied software via Ethernet, USB or Wifi.

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA


Manufacturer: PCE Instruments
US$ 4,095.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 20US
The particle counter PCE-PQC 20US is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the particle counter PCE-PQC 20US can be read out and processed via the supplied software via Ethernet, USB or Wifi.
 

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,095.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 21US
The dust measuring device PCE-PQC 21US is a portable detection system that can count particles of certain sizes in the air. Furthermore, the air temperature and the relative humidity are monitored.
 

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 3,895.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 21US
The dust monitor PCE-PQC 21US is a portable detection system that can count particles of certain sizes in the air. Furthermore, the air temperature and the relative humidity are monitored.
 

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 3,895.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 21US
The particle counter PCE-PQC 21US is a portable detection system that can count particles of certain sizes in the air. Furthermore, the air temperature and the relative humidity are monitored.
 

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 3,895.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MTS500 NL

The PCE-MTS500 NL is a motorized material tensile tester for use with the following:  PCE-FB, PCE-FM, PCE-PTR, PCE-DFG and PCE-LFG Series. The motorized material tensile tester offers enhanced control and stability during material testing. It also helps to ensure the accuracy and repeatability of tension and compression force test results. Digital speed display and digital repeat function.

- Force capacity of 5000 N / 500 kg / 1100 pounds
- Automatic or manual (push-button) operation
- Adjustable velocity, traverse and feed rate from 10 to 230 mm/min / 0.4 ... 9.05 in/min
- AC power connection (110V)
- Heavy duty steel design with extra long sample area

*** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***

Manufacturer: PCE Instruments
US$ 3,893.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MTS500 NL

The PCE-MTS500 NL is a motorized material test stand for use with the following: PCE-FB, PCE-FM, PCE-PTR, PCE-DFG and PCE-LFG Series. The motorized material test stand offers enhanced control and stability during material testing. It also helps to ensure the accuracy and repeatability of tension and compression force test results. Digital speed display and digital repeat function.

- Force capacity of 5000 N / 500 kg / 1100 lbs
- Automatic or manual (push-button) operation
- Adjustable velocity, traverse and feed rate from 10 to 230 mm/min (0.4 to 9.1 in)
- AC power connection (110V)
- Heavy duty steel design with extra long sample area

*** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***

Manufacturer: PCE Instruments
US$ 3,893.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MTS500 NL

Universal Testing Machine PCE-MTS500 NL for use with the following: PCE-FB, PCE-FM, PCE-PTR, PCE-DFG and PCE-LFG Series. Universal Testing Machine PCE-MTS500 offers enhanced speed control and stability during material testing. It also helps to ensure the accuracy and repeatability of tension and compression force test results. Digital speed display and digital repeat function.

- Force capacity of 5000 N / 500 kg / 1100 pounds
- Automatic or manual (push-button) operation
- Adjustable velocity, traverse and feed rate
- AC power connection (110V)
- Heavy duty steel design and extra wide sample area

*** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***

 

Manufacturer: PCE Instruments
US$ 3,893.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
US$ 3,885.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 7

The PCE-CSM 7 is a portable brightness tester used to measure different spectral parameters. This user-friendly, ergonomically designed brightness tester automatically performs a white and black calibration when powered on. Suitable for manufacturing quality control as well as product research and development, the brightness tester offers impressive measuring accuracy and comes manufacturer calibrated. Camera/illumination locating for small samples.


- Color spaces: CIEL*a*b*C*h* CIEL*a*b* CIEXYZ CIERGB CIEL*u*v*
  CIEL*C*h +Yellowness + Whiteness + Color Fastness
- Offers two different measuring apertures, 4 and 8 mm
- Three light sources D65, D50, A
- Optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Illumination/Viewing Angles 8°/d 

Manufacturer: PCE Instruments
US$ 3,708.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CSM 7

PCE-CSM 7 is a portable color meter used to measure different spectral parameters. This user-friendly, ergonomically designed color meter automatically performs a white and black calibration when powered on. Suitable for manufacturing quality control as well as product research and development, the color meter offers impressive measuring accuracy and comes manufacturer calibrated. Camera/illumination locating for small samples.


- Color spaces: CIEL*a*b*C*h* CIEL*a*b* CIEXYZ CIERGB CIEL*u*v*
  CIEL*C*h +Yellowness + Whiteness + Color Fastness
- Offers two different measuring apertures, 4 and 8 mm
- Three light sources D65, D50, A
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Illumination/Viewing Angles 8°/d 

Manufacturer: PCE Instruments
US$ 3,708.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer