Order no.: PCE-VM 31-WB

The PCE-VM 31-WB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see
  accessories)

 

Manufacturer: PCE Instruments
US$ 4,369.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31-WB

The PCE-VM 31-WB Human Vibration Meter or Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see   
  accessories)

 

Manufacturer: PCE Instruments
US$ 4,369.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31-WB

The PCE-VM 31-WB Tri-Axial Accelerometer or Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold
  separately (see accessories)

 

Manufacturer: PCE Instruments
US$ 4,369.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VC21

PCE-VC21 is a portable shaker vibration calibrator used to calibrate vibration sensors, meters, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with adjustable quartz-stabilized vibration frequencies between 15.92 and 1280 Hz and adjustable vibration amplitudes between 1 m/s² and 20 m/s².


- Load-independent vibration magnitude
- 7 adjustable vibration frequencies
- 5 adjustable vibration amplitudes

 

Manufacturer: PCE Instruments
US$ 4,327.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

Manufacturer: PCE Instruments
US$ 4,307.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see   
  accessories)

 

Manufacturer: PCE Instruments
US$ 4,307.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

Manufacturer: PCE Instruments
US$ 4,307.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold
  separately (see accessories)
 

 

Manufacturer: PCE Instruments
US$ 4,307.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 14US

The dust measuring device PCE-PQC 14US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-55 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 14US

The dust monitor PCE-PQC 14US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-55 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 14US

The particle counter PCE-PQC 14US quickly detects where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Handheld Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.5(fixed) 0.6-55 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive surface testing - conductivity meter for metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
US$ 4,295.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDM 50

The PCE-DDM 50 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
US$ 4,251.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IDM 3D
The 3D digital microscope PCE-IDM 3D is a microscope with its own user interface, in which various analysis functions are available. The live image and the user interface are transmitted together via the VGA connection to the 3D digital microscope PCE-IDM 3D to a connected monitor.

- 3D rotation 360°
- Lens magnification: 0.3 ... 2.2 times
- Picture format 1920 x 1080 Full HD
- Focusing range 250 mm / 9.8 in
Manufacturer: PCE Instruments
US$ 4,197.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-IDM 3D
The 3D inspection camera PCE-IDM 3D is a microscope with its own user interface, in which various analysis functions are available. The live image and the user interface are transmitted together via the VGA connection to the 3D inspection camera PCE-IDM 3D to a connected monitor.

- 3D rotation 360°
- Lens magnification: 0.3 ... 2.2 times
- Picture format 1920 x 1080 Full HD
- Focusing range 250 mm / 9.8 in
Manufacturer: PCE Instruments
US$ 4,197.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MCWHU25

The PCE-MCWHU25 Hanging Scales have a high weight range of up to 25 t and a resolution of 5 kg. The housing of the hanging scales has an IP 67 protection. The digit height is 40 mm / 1.6 in, and thanks to the display's high contrast it is easy to read. The included remote control can control the hanging scales at a maximum distance of 8 m / 26 ft.


- Capacity [Max]: 25000 kg
- Readability [d]: 5 kg
- Capacity [Min]: 200 kg

Manufacturer: Dini Argeo GmbH
US$ 4,177.45

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 20US
The dust measuring device PCE-PQC 20US is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the dust measuring device PCE-PQC 20US can be read out and processed via the supplied software via Ethernet, USB or Wifi.
 

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA

Manufacturer: PCE Instruments
US$ 4,095.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PQC 20US
The dust monitor PCE-PQC 20US is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the dust monitor PCE-PQC 20US can be read out and processed via the supplied software via Ethernet, USB or Wifi.

- Table Top Particle Counter with 10 hour battery life continuous use
- 6 channel measuring range 0.3(fixed) 0.4-25 um(user defined)
- 45,000 record internal memory
- Counting efficiency: 50% at 0.5 μm 100% at > 0.75 μm according to JIS 
ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration mode (PM 2.5, PM 10)
- Ethernet, USB, Touch Screen display, Audible Alarms & Wifi Optional
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

- Made in the USA


Manufacturer: PCE Instruments
US$ 4,095.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer