The PCE-288-R Water Analysis Meter or Redox Meter is a very easy to use meter to measure mV / pH / ºC. In the PCE-228-R Redox Meter, values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.

- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real-time data transfer

 

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- pH
- Urea
- Nitrite
- Nitrate
- Phosphate
- Ammonia
- Iron
- Copper
- Potassium

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
- incl. ISO Calibration Certificate

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Cyanuric acid
- Bromine
- Iron
- Iodine

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities

The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

The water analysis meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The water analysis pH meter can be recalibrated by using the calibration solutions that are supplied with the device.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

**Care must be taken when inserting probe to not break it**

The water analysis meter has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this water analysis meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

- Measuring range: 0.00 ... 14.00 pH
- Dissolution: 0.01 pH
- Power supply: 4 x 1.5 V AAA batteries

 

**Care must be taken when inserting probe to not break it** 

The water analysis meter chlorine tester with a measuring range of 0 ... 10 mg/l has been developed for rapid chlorine measurement in water. The display of the water analysis meter shows the chlorine content and the temperature.

- Measuring range chlorine: 0 ... 10.00 mg/l
- Measurement accuracy: ±2% of full scale
- Manual 2-point calibration
- Measured value stabilization
- Exchangeable chlorine electrode
- Ideal for swimming pools

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor

The water analysis meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable water analysis meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable