PCE Instruments UK: Test Instruments

Order no.: PCE-SGM 60-ICA
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 300P

For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: -40 ... +150 °C  (-40 ... +302 °F)
- Current consumption: 200 mA
- Power supply : 24 (18 ... 36) VDC
- Questionnaire starts evaluation process
- Application: pellets, wood chips

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T236-ICA

PCE-T236 is a digital handheld tachometer or rotation test instrument for both contact and non-contact measurement. This tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.


- Optical laser measurement range: 5 ... 99999 rpm
- Contact measurement range: 0.05 ... 19999 rpm
- Accuracy: Less than 60000 rpm = ±0.05% fs , Greater than 60000 rpm = ±0.15% fs
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AA1
Test Instruments manufacturer
Order no.: PCE-007

Anemometer with port, memory, software for wind speed, temperature and air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-009

This thermal anemometer has a good relation between price and quality and it combines accuracy and versatility with the ability to transfer data directly to a computer. This thermal anemometer forms a part of a professional's basic equipment to regulate and test ventilation systems. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m3/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-JR 911

The PCE-JR-911 Data Logger with logging function is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Data Logger comes complete, allowing the user to program specific time intervals for taking measurements, such as over an entire week. These temperature logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322A

PCE-322A is a handheld, portable, professional Class II sound data logger or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.


- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Data Logger with memory for up to 16,000 readings is used for measuring light in industry, agriculture and research. The Data Logger is also used for determining illumination in the workplace, shop window displays, and by designers. This light logging instrument is calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TT-GEL
Ultrasonic contact gel for use with ultrasonic contact transducers

- Improves contact between the transducer head and the material to be measured
- Protects material surfaces from the transducer head
- 120 ml size
- See downloads for MSDS
Manufacturer: Charles Tennant & Co (Eire) Ltd.
Test Instruments manufacturer
Order no.: PAX-I 0000
The Handheld Tachometer Display PAX I can also be also used as a flexible laboratory instrument for measuring speed and revolutions, or to count. Due to the robust housing and IP 65 protection class … [more]
Manufacturer: Wachendorff Prozesstechnik GmbH
Test Instruments manufacturer
Order no.: PAX-I 0010
[more]
Manufacturer: Wachendorff Prozesstechnik GmbH
Test Instruments manufacturer
Order no.: PCE-BS 3000

The Analytical Balance PCE-BS 3000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 3000 can be used for weighing as well as for piece counting.


- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BS 6000

The Analytical Balance PCE-BS 6000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 6000 can be used for weighing as well as for piece counting.


- Weighing capacity: Max. 6000 g
- Readability: 1 g
- Repeatability: 1 g
- Accuracy: ± 3 g
- Calibratable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: T592

The distance meter device is ideal for measuring flat surfaces of streets, roads, or highways. The distance meter device solid construction makes it resistant to adverse weather conditions and other environmental conditions.


- Measurement range: 9999.9 m (only displays metric)
- Reading: 1 cm
- Tolerance: < 0.05 %
- Wheel diameter: 318.5 mm (= perimeter of 1m)
- Wheel type: metal wheel
- Weight: 3900 g

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: T593

The distance meter of high accuracy is ideal to measure level surfaces like streets, ways or roads. Its rugged construction makes it resistant to adverse climatologic conditions and other environmental conditions. The wheel measures automatically up to 9999.9 meters.


- Measurement range: 9999.9 m (only displays metric)
- Reading: 1 cm
- Tolerance: < 0.02 %
- Wheel diameter: 318.5 mm (=  1m perimeter)
- Wheel type: metal wheel
- Weight: 4100 g

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: FMW-T

The Absolute Moisture Meter FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Absolute Moisture Meter works without causing any damage to the material and it is mainly used to measure building walls.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMW-B

The Absolute Moisture Meter FMW-B determines moisture content by means of the capacitive method. With the Absolute Moisture Meter an electromagnetic field quickly determines capacitance of wood. All test instruments come manufacturer calibrated.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 %
   building materials

- Resolution: 0.1 %  / Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMC

The Absolute Moisture Meter FMC can accurately measure absolute moisture in diverse building materials. To detect moisture, the test instrument has a connection for external sensors which can either be inserted into the building material or placed on it.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 % / Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.