PCE Instruments UK: Test Instruments

Order no.: MPC-3

This round sample cutter features four internal blades for quick, easy and clean cutting of paper, leather, cotton, textiles, cork and more by hand.


- Maximum sample thickness: 3 mm / 0.12"
- Sample cut: 11.3 cm diameter / 100 cm² / 30 in²
- Stainless steel blades housed in cast steel casing

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-CL2

The Air Quality Meter Gasman-CLis a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

  • Non-rechargeable, 1-year battery
  • For CL2 (Chlorine)
  • Dust and water resistant - IP 65/67
  • 0 ... 5 ppm
Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-NO2

The Air Quality Meter Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Nitrogen Dioxide)
- Dust and water resistant - IP 65/67
- 0 ... 10 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Triple Plus + BASE

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:


- Selection of flammable gas correction factors (so one unit can be used in
  several locations across a site)
- Annotation of the data file with user names and site names selected from
  pre-configured files in the unit


* Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-HT110

The PCE-HT110 Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: PCE-CM 41

With our conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. Our conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. Auto ranges up to 20,000 PPM.


- EC conductivity: 0...2,000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2,000 mg/l (ppm)  /  20,000 mg/l (ppm)
- Temperature: 0.0...60 °C / 32 ... 140 °F
- Water resistant (IP 67)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WMH-3

PCE-WMH-3 is a portable handheld digital absolute moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


- Measuring range: 6 ... 60 % moisture content
- Accuracy: ±1 % (within 6 ... 12 % range), ±2 % (13 ... 28 %), ±2 % (29 ... 60 %)
- Resolution: 0.1 %

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WP21

PCE-WP21 is a concrete absolute moisture meter used to perform noninvasive, nondestructive moisture measurements of concrete construction and building materials. An ideal tool for assessing the drying and curing of concrete slabs, footings, foundations, floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches deep to return a mean-value moisture content percentage.


- Moisture content measuring range: 1% ... 8%
- Resolution: 0.1%
- Accuracy: ±0.7%  

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: P2

P2 is a digital paper moisture meter used primarily for kraft paper, brown paper, wrapping paper, packaging paper, cardboard and paperboard. This easy-to-use portable handheld paper moisture meter takes quick and highly accurate nondestructive measurements of paper moisture.


- Moisture measuring range: 3 ... 10% water content
- Resolution: 0.1% water content
- Automatic temperature compensation

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FMD 6

The FMD 6 is a handy and versatile paper moisture meter for reliable measurement of the moisture content of paper, wood and construction materials. The paper moisture meter has preset characteristic curves for the moisture measurement of specific materials. The moisture meter needs external sensors (sold separately - please see accessory list) to operate. The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
- Memory stores up to 1,000 measurement values for transfer to PC using
  included software

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-555

PCE-555 is a combination digital hygrometer and digital thermometer used to measure relative humidity or air humidity as well as air temperature, dew point temperature and wet-bulb temperature. This portable, handheld meter allows for quick and easy detection of environmental conditions. Applications include monitoring climates of refrigerated trucks, warehouses, construction sites and HVAC installations, where excess moisture, condensation and uneven temperatures can create mold, spoilage and health hazards.


- Humidity measuring range: 0 ... 100 % relative humidity (rh)
- Temperature measuring range: -30 ... 100°C / -22 ... 212°F
- Resolution: 0.01 % rh / 0.01°C or 0.018°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT-225A

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² or 1450 ... 8702 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- kg/cm², psi, and MPa conversion tables 
- Optional test anvil to verify accuracy listed under accessories 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 29

PCE-EM 29 is a portable handheld electromagnetic field meter or detector with a spherical triaxial (3-axis) three-dimensional (3D) isotropic sensor used to measure electromagnetic fields (EMFs) as well as radio frequencies (RFs). This easy-to-use battery-powered RF meter features a large 4-digit LCD screen and an adjustable value limit with acoustic alarm functionality.


- Frequency range: 50 MHz to 3.5 GHz
- Measurement range: 38 mV/m to 11 V/m
- Accuracy: ±1.0 dB (50 MHz to 1.9 GHz), ±2.4 dB (1.9 GHz to 3.5 GHz)
- Displays units in mV/m, V/m, µgA/m, mA/m, µgW/m² or mW/m²
- Calculates average value and stores up to 99 readings to memory 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HGP

PCE-HGP is a multifunction moisture tester for wood that uses penetrating pins to measure the moisture content of wood and other construction or building materials. PCE-HGP also measures the relative humidity (RH) and ambient temperature and calculates the dew point temperature of the air.


- Material moisture measuring range: 6% ... 60%
- RH measuring range: 0% ... 100%
- Air temp. measuring range:  -5 ... 50ºC / 23 ... 122ºF
- Dew point temp. measuring range: -9 ... 50ºC / 16 ... 122ºF
- Measures 3 wood groups (12 types + 270 exotic types)  

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 204

PCE-VT 204 is a multifunction handheld tachometer with the ability to accurately measure both rotation and vibration. An ideal tool for the testing and inspection of machine parts and components such as motors, transmissions, gears, gear boxes and wheels, this multi-purpose device measures revolutions per minute (RPMs) as well as three-axis vibration, i.e., speed or velocity, displacement and acceleration.


- Vibration measurement: velocity or speed, acceleration and displacement
- RPM measurement: contact / mechanical and noncontact / optical
- Internal memory for up to 1000 readings
- Min / max and data hold functions
- RS-232 port

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a factory-calibrated (certificate included) portable digital battery-powered accelerometer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) /
  9 Hz ... 10 kHz
(in 10 kHz mode) acceleration; 10 Hz ... 1 kHz velocity /
  displacement
- Resolution: 0.1 m/s2 / 0.1 yd/s2; 0.1 mm/s / 0.003 in/s;
  1 µm / 3.3814e-14 oz ; 1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM

The class 2 (type 2) sound level meter SLT-TRM is a noise meter, sound pressure level (SPL), or decibel (dB) meter with an audible or visual alarm. Used for long-term measurement of occupational noise exposure limits, the sound level meter SLT-TRM is an effective device across the industry spectrum. 


- Class 2
- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Frequency weighting: A
- Time weighting: Fast
- Output: 4 ... 20 mA
- IP 54 ingress protection rating on transmitter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT-TRM

The Lux Meter LXT consists of a measurement sensor and a small wall bracket or holder with a 1.5 m / 4.9 ft cable, and a light transmitter. The application field of the Lux Meter LXT is the continuous measurement of daylight and light control in photo labs and production facilities, such as in the manufacturing of food and medicine.


- Measuring range: 0 ... 50000 Lux in three areas
- Resolution: 0.1 lx / lx 1
- Accuracy: ± 5% of reading

 

Manufacturer: PCE Instruments
Test Instruments manufacturer

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.