PCE Instruments UK: Test Instruments

Accelerometer PCE-VM 3D
£ 890.00
Price excl. VAT &. delivery

The Accelerometer provides quick and simple measurements of acceleration and displacement to check the acceleration of machines and construction parts, allowing for defects and larger unbalances to be determined. The Accelerometer is able to record vibration in three axis: on the x-, y-, and z- axes. The large display of the Accelerometer allows capturing momentary values as well as recording a whole vibration spectrum.


  • Vibration acceleration: 0.1 m/s² … 400.0 m/s² (Peak); (0 … 40 g force)
  • Vibration velocity: 0.01 … 400.0 mm/s
  • Vibration amplitude: 0.001 mm … 4.000 mm (Peak-Peak)

Accelerometer PCE-VM 400B
£ 4,672.00
Price excl. VAT &. delivery
Accelerometer / Vibration sensor is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The accelerometer / vibration sensor has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

  • 4 channels for measurement
  • Measurement on shafts, bearings, motors, generators
  • Piezoelectric acceleration sensors
  • Wide frequency range: 1 … 25000 Hz
  • Acceleration: 0.001 … 200 m/s²
  • Velocity: 0.001 … 200 mm/s
  • Balancing up to 8 correction planes
  • USB interface
  • 4 GB data storage
  • Evaluation according to ISO 10816
Accelerometer PCE-VM 40C
£ 3,560.00
Price excl. VAT &. delivery

The PCE-VM 40C Accelerometer with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Accelerometer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Accelerometer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time.


  • Triaxial acceleration meter
  • In accordance with BS 7385 standard
  • Quad band GSM (optional)- SMS alarm notifications  (optional)
  • Memory size of 100,000 values (SD card)
  • Integrated NiMH battery
  • FFT analysis, XYZ and vector sum display

Accelerometer PCE-VM 5000
£ 1,977.00
Price excl. VAT &. delivery

The 4-channel PCE-VM 5000 Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


  • 4 channels / inputs
  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity and displacement
  • Connection of up to 4 sensors simultaneously, 2 included
  • Data storage on SD card
  • Sampling rate: min. 1 sec.

Accelerometer PCE-VM 5000-ICA Incl. ISO Calibration Certificate
£ 2,296.00
Price excl. VAT &. delivery
ISO Calibration

The 4-channel PCE-VM 5000-ICA Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


  • 4 channels / inputs
  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity, displacement
  • Connection of up to 4 sensors simultaneously, 2 included
  • Data storage on SD card
  • Sampling rate: minimum 1 sec.
  • Incl. ISO calibration certificate

Accelerometer PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery

The 4-channel PCE-VM 5000 accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the accelerometer is able to record vibrations at different points of the component to be tested.


  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity and displacement
  • Connection of up to 4 sensors simultaneously
  • Data storage on SD card
  • Including 2 additional sensors for vibration

Accelerometer PCE-VM 5000-KIT-ICA incl. ISO Calibration Certificate
£ 2,937.00
Price excl. VAT &. delivery
ISO Calibration

The 4-channel PCE-VM 5000 Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the accelerometer is able to record vibrations at different points of the component to be tested.


  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity and displacement
  • Connection of up to 4 sensors simultaneously
  • Data storage on SD card
  • Including 2 additional sensors for vibration
  • Including ISO Calibration Certificate

Accelerometer PCE-VT 1100
£ 260.00
Price excl. VAT &. delivery

The accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"


Accelerometer PCE-VT 1100-ICA incl. ISO Calibration Certificate
£ 421.00
Price excl. VAT &. delivery
ISO Calibration

The accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO Calibration Certificate



ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.