The Class 1 Noise Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the Noise Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.
- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
The Class 1 Noise Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the Noise Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.
- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator
- Incl. ISO Calibration Certificate (for sound calibrator)
The Class I Sound Level Calibrator is a battery powered sound source. With the Class I sound level calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.
- Sound pressure level: 94 dB, 114 dB
- Accuracy class: IEC 942, class 1
- Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
- Frequency: 1000 Hz for A, B, C and D frequency weighting
The Class I Sound Level Meter Calibrator is a battery powered sound source. With the Class I sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.
- Sound pressure level: 94 dB, 114 dB
- Accuracy class: IEC 942, class 1
- Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
- Frequency: 1000 Hz for A, B, C and D frequency weighting
The class 1 sound level meter meets all requirements for noise measurement and frequency analysis. This integrating precision pulse sound level meter complies with all applicable standards and guidelines.
- Accuracy class 1 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional
The class 1 sound level meter PCE-430 meets all requirements for noise measurement and frequency analysis. This integrating precision pulse sound level meter complies with all applicable standards and guidelines.
- Accuracy class 1 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional - Incl. class 1 sound calibrator (for verification only)
PCE-430 is a class 1 sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy class 1 sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.
- Measuring range: 22 ... 136 db(A) - LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN - Frequency weighting: A, B, C and Z - Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms) - Adjustable data-recording interval from 1 s ... 24 h - 1/1 octave band filter (optional 1/3 octave band filter upgrade) - Includes ISO calibration certificate
The class 1 sound level meter PCE-430-SC 09-ICA meets all requirements for noise measurement and frequency analysis. This integrating precision pulse sound level meter complies with all applicable standards and guidelines.
- Accuracy class 1 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional - Incl. class 1 sound calibrator - Incl. ISO calibration certificate (for sound calibrator)
The Class 1 Sound Level Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the Sound Level Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.
- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
The Class 1 Sound Level Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the Sound Level Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.
- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator
- Incl. ISO Calibration Certificate (for sound calibrator)
The class 1 SPL meter PCE-430 meets all requirements for noise measurement and frequency analysis. This integrating precision pulse SPL meter complies with all applicable standards and guidelines.
- Accuracy class 1 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional - Incl. class 1 sound calibrator (for verification only)
The class 1 SPL meter PCE-430-SC 09-ICA meets all requirements for noise measurement and frequency analysis. This integrating precision pulse SPL meter complies with all applicable standards and guidelines.
- Accuracy class 1 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional - Incl. class 1 sound calibrator - Incl. ISO calibration certificate (for sound calibrator)
The Class 1 SPL Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the SPL Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.
- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
The Class 1 SPL Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the SPL Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.
- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator
- Incl. ISO Calibration Certificate (for sound calibrator)
PCE-428 is a class 2 data logging decibel meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy decibel meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The decibel meter calculates the equivalent continuous sound level Leq (LXeq).
- Measuring range: 25 ... 136 db(A) - LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN - Frequency weighting: A, B, C and Z - Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms) - adjustable data-recording interval from 1 s ... 24 h - 1/1 octave band filter (optional 1/3 octave band filter upgrade) - incl. ISO Calibration Certificate
The data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.
- Accuracy class 2 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional - Including class II sound calibrator
PCE-428 is a class 2 data logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy noise meter / sound meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The noise meter / sound meter calculates the equivalent continuous sound level Leq (LXeq).
- Measuring range: 25 ... 136 db(A) - LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN - Frequency weighting: A, B, C and Z - Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms) - adjustable data-recording interval from 1 s ... 24 h - 1/1 octave band filter (optional 1/3 octave band filter upgrade) - incl. ISO Calibration Certificate
The data logging noise meter / sound meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The noise meter / sound meter is a class 2 device and is equipped with an octave band frequency filter. The noise meter / sound meter can optionally be upgraded with a 1/3 octave band filter.
- Accuracy class 2 - A, B, C & Z frequency weighting - Fast, Slow, Impulse and Peak time weighting - Statistics function - 1/1 octave band included - 1/3 octave band optional - Including class II sound calibrator
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
