The clamp meter is used for quick and easy AC measurements. For current measurement, the clamp meter is plugged over the live conductor. The clamp meter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.
- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001) CAT II 1000V CAT III 600V - Incl. ISO Calibration Certificate
The flexible clamp meter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible clamp meter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.
- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
The flexible digital clamp meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible clamp meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil.
- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory - Incl. ISO Calibration Certificate
The clamp meter is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the clamp meter covers a large range of current measurements.
Measurement function:
- AC current
- DC current
- DC voltage
- AC voltage
- LowZ AC/DC
- Resistance
- Continuity test
- Diode test
- Capacitances
- Temperature (type K)
- Frequency (with current clamp)
- Frequency (with voltage measurement)
- Frequency (direct measurement)
- Duty cycle
The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.
- Measuring range: 0 ... 1500 V AC/DC - Free app for Android and iOS - Data logging for up to 100,000 measured values - Inrush current measurement - Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.
- Measuring range: 0 ... 1500 V AC/DC - Free app for Android and iOS - Data logging for up to 100,000 measured values - Inrush current measurement - Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.
- Measuring range: 0 ... 1500 V AC/DC - Free app for Android and iOS - Data logging for up to 100,000 measured values - Inrush current measurement - Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V - incl. ISO Calibration Certificate
The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.
- Measuring range: 0 ... 1500 V AC/DC - Free app for Android and iOS - Data logging for up to 100,000 measured values - Inrush current measurement - Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V - incl. ISO Calibration Certificate
The clamp meter has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the clamp meter.
- Measuring range: 0 ... 1000 A AC/DC - Bluetooth interface - Inrush current measurement - LC color display - Not Connected Voltage function
The clamp meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp meter, or you can use the integrated clamp mechanism. By using the clamp of the clamp meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
- Voltage: 600 V AC/DC - Current: 600 A AC/DC - Electrical Resistance: 1000 Ω - Clamp mechanism
The Clamp Meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital clamp meter, or you can use the integrated clamp mechanism. By using the clamp of the digital clamp meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
- Voltage: 600 V AC/DC - Current: 600 A AC/DC - Electrical Resistance: 1000 Ω - Clamp mechanism - Incl. ISO Calibration Certificate
The clamp meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the clamp meter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
- Current measurement up to 1000 A - Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
The clamp meter PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the clamp meter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
- Current measurement up to 1000 A - Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate
Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.
- AC / DC current, voltage and resistance measurement - 3 2/3-digit LCD display - Power supply: 2 x 1.5V AAA battery - Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
This clamp meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.
- AC/DC current, AC voltage and frequency measurement - AC voltage test (contactless test): 100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz - DCA zero point function
This clamp meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.
- AC/DC current, AC voltage and frequency measurement - AC voltage test (contactless test): 100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz - DCA zero point function - Incl. ISO Calibration Certificate
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.
Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.
Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
