PCE Instruments UK: Test Instruments

Order no.: PCE-TPWLKM

The PCE-TPWLKM Industrial Scales are verified forklift that integrates a scale of two ranges. It is  verified by Trade Class M III, with a weight range up to 2,000 kg.


- Two weighing ranges for high accuracy
- Accuracy of ±0.1 % of the weighed value
- IP 68 protection type
- 25 mm stainless steel screen

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-DC3

PCE-DC3 is a user-friendly digital clamp meter with automatic range selection used to measure AC/DC electrical currents with high accuracy. Combining a basic digital multimeter with a current sensor, the PCE-DC3 clamp meter features a thoughtfully integrated backlit LCD screen and built-in flashlight for illumination in dark spaces. In addition, the clamp meter's compact size allows unique access to small and hard-to-reach places.


- AC current (50 / 60 Hz): 2 A  / 1-mA / ± 2.8% + 10 dgt
- DC current: 2 A / 1-mA / ± 3.0% + 10 dgt
- AC overload protection: 100V AC up to 600V AC 50 / 60 Hz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: GPM-60
[more]
Test Instruments manufacturer
Order no.: RS232-USB
[more]
Manufacturer: USB ONLINE INT'L ELECTRONICS LIMITED
Test Instruments manufacturer
Order no.: PCE-MO 2001

This Milliohmmeter comes with a large 3½ positions LCD display that shows the measurement values. Used for measuring binding energy in mines, planes, boats and also for both industrial and home installations.


- Measuring ranges: 100 μΩ ... 2000 Ω
- Resolution: 0.1 / 1/10 mΩ; 0.1 / 1 Ω
- Accuracy: ± 0.1%
- Measuring rate: approx. 0.4 s


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CAL-SH5-Z
[more]
Manufacturer: Exova Metech GmbH ( Caldi )
Test Instruments manufacturer
Order no.: PCE-RGB2

PCE-RGB2 is a color meter for RGB (red, green, blue) or HSL (hue, saturation, luminance) color measurements. The colorimeter's 45 ° / 0 ° measurement geometry and 16 mm / ≈ 0.63" diameter aperture accommodate standardized color measurement methods on a variety of surfaces. The handheld color-measuring probe is connected to the colorimeter via a 1.5 m / 4.9' long cable, allowing a wide range of motion for the color measurement procedure.


- Measurement geometry: 45° / 0°
- Measurement range: RGB: 0 to 1023 / HSL: 0 to 1.00
- Resolution: 1 for RGB / 0.001 for HS
- Repeatability: < 3 RGB, for a minimum of 1 measurement
- Internal light source can be disabled to measure active light sources 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 882

PCE-EM 882 is a portable, handheld, multifunctional digital device capable of measuring four different physical parameters. An ideal tool for use in industrial hygiene, HVAC performance assessment and environmental condition monitoring applications, this easy-to-use measuring instrument includes sensors for measuring sound, light, temperature and relative humidity.


- Sound: Low and high A- and C-weighted noise measurements
  from 35 ... 130 dB
- Light: 20, 200, 2000, 20000 lux ranges
- Temperature: Range from -20 ... 750ºC / -4 ... 1400ºF
- Relative humidity (RH): Range from 25 ...95% RH 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Air Humidity Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Air Humidity Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RS232-USB
[more]
Manufacturer: USB ONLINE INT'L ELECTRONICS LIMITED
Test Instruments manufacturer
Order no.: PCE-172

Accurate lux meter for the industrial sector.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT

The LXT Light Meter consists of a flow sensor with handle and a wall bracket to 1.5 m cable, a light transmitter, and a digital display. The main use of the Light Meter is in the continuous light measurement and light monitoring of photo labs and production areas, such as food or drug manufacturing.


- Measuring range: 0 ... 50000 Lux in three areas
- Resolution: 0.1 lx / lx 1
- Accuracy: ± 5% of reading
- 4 to 20 mA analog output

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: MPS-M

MPS-M is a mechanical grammage scale used to determine the basis weight of paper or textiles in grams per square meter. Featuring a neutral- or zero-positioning screw, heavy duty steel frame and cast iron feet, this mechanical basis weight scale for paper or textiles:


- Offers a weighing range up to 900 g/m²
- Includes a test weight and 2 stencils (for sampling thin paper)
- Provides years of maintenance-free use

**Requires sample cutter listed under accessories** 

 

Manufacturer: Jakob Maul GmbH
Test Instruments manufacturer
Order no.: MPS-M

MPS-M is a mechanical scale used to determine the basis weight of paper or textiles in grams per square meter. Featuring a neutral- or zero-positioning screw, heavy duty steel frame and cast iron feet, this mechanical basis weight scale for paper or textiles:


- Offers a weighing range up to 900 g/m² 
- Includes a test weight and 2 stencils (for sampling thin paper)
- Provides years of maintenance-free use

**Requires sample cutter listed under accessories**  

 

Manufacturer: Jakob Maul GmbH
Test Instruments manufacturer
Order no.: PCE-DMS 200

PCE-DMS 200 is a GSM paper basis weight scale used to accurately determine the basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².


- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing up to 13 cm circle cut samples

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: INT-G-N

Charging station and interface for Gasman gas warning devices. Used as a charging station only for all Gasman gas warning devices equipped with a rechargeable battery. The interface is used for all Gasman N as an interface to a PC (RS-232). Delivery 1 x charger / interface, 1 x power adapter with country adapter.

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-P01

PCE-P01 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P15

PCE-P15 is a differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 1.034 bar / 0 to 15 psi
- Resolution: 0.001 bar / 0.01 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910

PCE-910 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-932

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: Pressure sensors are sold separately.


- Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
- Measures system pressure in all media (e.g., gasses, liquids, etc.)
- Offers min, max and hold functionality

Manufacturer: PCE Instruments
Test Instruments manufacturer

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.