PCE Instruments: Test Instruments

Order no.: PCE-DC3

PCE-DC3 is a user-friendly digital clamp meter with automatic range selection used to measure AC/DC electrical currents with high accuracy. Combining a basic digital multimeter with a current sensor, the PCE-DC3 clamp meter features a thoughtfully integrated backlit LCD screen and built-in flashlight for illumination in dark spaces. In addition, the clamp meter's compact size allows unique access to small and hard-to-reach places.


- AC current (50 / 60 Hz): 2 A  / 1-mA / ± 2.8% + 10 dgt
- DC current: 2 A / 1-mA / ± 3.0% + 10 dgt
- AC overload protection: 100V AC up to 600V AC 50 / 60 Hz

Manufacturer: PCE Instruments
Order no.: PCE-GPA 62

Three-Phase Clamp Meter with network analyzer / power and energy meter with data logger. he three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Voltage measurement: 4.0 ... 600.0 V RMS value ± 0.5%, ± 5 digits / 0.1 V
- Voltage peaks (> 10V): 50 Hz - 60 Hz / ± 5% ± 50 digits
- Current measurements: 4.0 ... 1500.0 A real ± 1% V ± 5 digits / 0.01 A
- Current peaks (> 20A):  50 Hz - 60 Hz / ± 5% ± 50 digits


Manufacturer: PCE Instruments
Order no.: PCE-LCT 1

Clamp Meter to test leakage / RMS measurement / continuity and resistance test. With PCE-LCT 1 leakage current clamp meter it is possible to measure leakage current with a range up to 100 A. The  current meter can measure leakage current while current flows through electrical conductors that are not designed for conduction current. The leakage clamp meter is delivered manufacturer calibrated and can additionally be certified to ISO or standards.


- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 Ohms
- Test cables are included

 

Manufacturer: PCE Instruments
Order no.: PCE-PA 8000

With the PCE-PA 8000 Clamp Meter you will be able to perform prolonged measurements of electrical properties. The measurement data is saved in xls format on the included SD card to be easily transferred to a computer or laptop for review. The Clamp Meter comes manufacturer calibrated and can be certified to ISO or UTIL standards as an option.

- Display: 3.7 in / 94 mm LCD (320 x 240 pixels) with LED backlight
- Electrical properties: AC V, AC A, active power, apparent power, power factor, phase angle, power frequency
- Voltage ranges: 10 V ... 600 V AC, automatic range selection
- Measures current up to 1200 A
- Security / Standards: IEC1010CAT III 600V

Manufacturer: PCE Instruments
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Clamp Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)

Manufacturer: PCE Instruments
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose clamp meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
Order no.: CA-Y1N

The Y-Series Clamp on Tester Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp on Tester Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp on Tester Adapter comes manufacturer calibrated.
- Measuring range: 4 A ... 600 A AC
- Accuracy: 3%
- Transformer ratio (E:A): 1000 : 1

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-Y3N

The Y-Series Clamp on Tester Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp on Tester Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp on Tester Adapter comes manufacturer calibrated.
- Measuring range: 4 A ... 600 A AC
- Accuracy: 3%
- Transformer ratio (E:A): 100 : 1

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-Y4N

The Y-Series Clamp on Tester Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp on Tester Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp on Tester Adapter comes manufacturer calibrated.
- Measuring range: 4 A ... 600 A AC
- Accuracy: 2%
- Transformer ratio (E:A): 1 A : 1 mV DC

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-Y7N

The Y-Series Clamp on Tester Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp on Tester Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp on Tester Adapter comes manufacturer calibrated.
- Measuring range: 1 A ... 500 A AC
- Accuracy: ≤2%
- Transformer ratio (E:A): 1 A : 1 mV AC

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-A100-504

The AmpFLEX CA-A100-504 series Clamp on Tester measures the current according to the Rogowski principle. This Flex Clamp on Tester can safely measure the current contactless up to 2000 A. The flexible current probe can be connected to, for example, a multimeter via 4 mm (1.6 in) safety plugs. The Flex Clamp on Tester can be up to 45 cm (1.6 in) in length and can be easily set to busbars or large cable bundles.
- Range: 0.2 kA - 2 kA
- Accuracy: 1 %
- Loop length: 45 cm / 17.7 in

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-B102

The CA-B102 Clamp on Tester is designed for fast location of insulation faults. The Clamp on Tester has a maximum diameter up to 112 mm (4.4 in), and can be used with multimeters. Two selectable measuring ranges are available to allow for precise measurement according to DIN VDE 010.
- Dual range: 4 A and 400 A AC
- Large jaw diameter: 112 mm / 4.4 in
- For measurement according to DIN VDE 0100

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C100

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C102

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket
- Output protected against voltage surges

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C103

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in male plugs

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C106

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket
- Output: AC voltage

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C107

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in plug
- Output: AC voltage

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C112

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C113

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in plug

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-C122

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 1 A ... 1000 A
- Transformer Ratio: 1000 / 5
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.