Weather Station / Air Quality Station

Air Quality Station PCE-AQD 10-ICA incl. ISO Calibration Certificate
£ 498.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station is used to measure air quality. The Air Quality Station measures carbon dioxide, temperature and humidity. The CO2 sensor from the Air Quality Station is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% rh
  • Measuring range: 0 … 50°C / 32 … 122°F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
  • incl. ISO Calibration Certificate (only for CO2)
Air Quality Station PCE-AQD 20-ICA Incl. ISO Calibration Certificate
£ 761.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The air quality station is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
  • Incl. ISO calibration certificate
Air Quality Station PCE-VDL 16I
£ 222.00
Price excl. VAT &. delivery
2 year Warranty
The Air Quality Station from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Air Quality Station is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

  • 3-Axis acceleration up to 800 Hz
  • 32 GB SD memory card
  • Evaluation software
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
  • Temperature, Humidity, Air pressure, Vibration, and Light
Air Quality Station PCE-WSAC 50-110
£ 378.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

  • Supply voltage: 230 V AC
  • Input signal: 4 … 20 mA
  • 2 types of alarms
  • Sensor supply via evaluation device
  • Degree of protection: IP66
  • Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-120
£ 378.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The Air Quality Station  can be used to monitor and alert on the current wind speed.

  • Air Quality Station with adjustable alarms
  • 2 alarm types
  • Supply voltage: 230 V AC
  • Input signal: 0 … 10 V
  • Sensor supply via evaluation device
  • Degree of protection: IP66
  • Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-310
£ 378.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

  • Wind measuring device with adjustable alarms
  • 2 alarm types
  • Supply voltage: 24 V DC
  • Input signal: 4 … 20 mA
  • Sensor supply via evaluation device
  • Degree of protection: IP66
  • Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-211
£ 440.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

  • Wind measuring device with adjustable alarms
  • 2 alarm types
  • Supply voltage: 115 V AC
  • Input signal: 4 … 20 mA
  • Communication: RS485
  • Sensor supply via evaluation device
  • Degree of protection: IP66
  • Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-311
£ 440.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station  can be used to monitor and alert on the current wind speed.

  • Wind measuring device with adjustable alarms
  • 2 alarm types
  • Supply voltage: 24 V DC
  • Input signal: 4 … 20 mA
  • Communication: RS485
  • Sensor supply via evaluation device
  • Degree of protection: IP66
  • Incl. ISO calibration certificate
Air Quality Station PCE-WSAC 50-321
£ 440.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

  • Wind measuring device with adjustable alarms
  • 2 alarm types
  • Supply voltage: 24 V DC
  • Input signal: 0 … 10 V
  • Communication: RS485
  • Sensor supply via evaluation device
  • Degree of protection: IP66
  • Incl. ISO calibration certificate
Weather Station PCE-WSAC 50W 230
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The air quality meter is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.

  • Measuring range up to 180 km / h
  • Input: Pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analogue output
  • Supply voltage: 110 … 230V AC, 50/60 Hz
  • Ambient temperature -20 .. . 70°C / -4 … 158°F
  • Units adjustable: km / h, mph, m / s
Weather Station PCE-WSAC 50W 24
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The air quality meter is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air quality meter means stormy gusts can also be monitored.

  • Measuring range up to 180 km / h
  • Input: pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analog output
  • Supply voltage: 24V DC
  • Ambient temperature -20 … 70°C / -4 … 158°F
  • units adjustable: km / h, mph, m / s
Weather Station PCE-WSAC 50W 230-ICA incl ISO calibration certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Weather Station is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 … 20-mA analogue output of the air flow meter, the measured data can also be transferred to other controllers for evaluation.


  • Measuring range up to 180 km / h
  • Input: Pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analogue output
  • Supply voltage: 110 … 230V AC, 50/60 Hz
  • Ambient temperature -20 .. . 70°C / -4 … 158°F
  • Units adjustable: km / h, mph, m / s
  • Incl. ISO calibration certificate
Weather Station PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The weather station is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the integrated 4 … 20-mA analogue output of the air flowmeter, the measured data can also be transferred to other controllers for evaluation.
  • Measuring range up to 180 km / h
  • Input: pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analog output
  • Supply voltage: 24V DC
  • Ambient temperature -20 … 70°C / -4 … 158°F
  • Units adjustable: km / h, mph, m / s 
  • Incl. ISO calibration certificate
Weather Station CWG 2
£ 335.00
Price excl. VAT &. delivery
2 year Warranty

Weather station with 0 … 10 V output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 0 … 10 V
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Weather Station CWG 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty

Weather station with 4 … 20 mA output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 50 m/s
  • Output signal: 4 … 20 mA
  • Mounting: Pipe mounting / mounting via PG screw connection
  • Heating: yes

Weather Station CWR 1
£ 424.00
Price excl. VAT &. delivery
2 year Warranty

Compact weather station for weather monitoring. Basic weather station with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

  • Measuring range: 0 … 360°
  • Output signal: 4 … 20 mA
  • Assembly: pipe assembly / assembly via PG screw connection
  • Heating: yes