Water Analysis Meter PCE-PH 30

Order no.: PCE-PH 30
£ 107.00
£ 128.40
4250348719737
PCE-PH 30
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Water analysis meter PCE-PH 30
pH, conductivity, redox tester with interchangeable sensors /  Easy-to-read LC display / Pen pH meter / Automatic temperature compensation

The pH tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH tester is used to control pH and conductivity. It also serves for simultaneous temperature measurement. Furthermore, the pH tester can be used to measure the redox potential. 

A three-point calibration and automatic temperature compensation up to 90°C / 194°F guarantee high accuracy even with fluctuating measuring temperatures. The pH tester has a readable display. The test device is supplied with pH and temperature probe, calibration and storage fluid. The redox probe is available separately as an accessory.

- 6 in 1 pH tester
- IP57 housing
- Automatic temperature compensation
- Battery operation
- 3 point pH calibration
- Exchangeable electrodes
- Max-Min Hold function
- Automatic electrode detection
Measuring function         pH
Measuring range -2 ... 16 pH
Resolution 0.01 pH
Accuracy ± 0,01pH + 1Dgt
ATC 0 ... 90°C / 32 ... 194°F
Calibration pH 4, 7, 10
   
Measuring function Redox
Measuring range ± 1000 mV
Resolution 1 mV
Accuracy ± 2 mV + 1 Dgt
   
Measuring function Conductivity
Measuring range 0 ... 2000 μS, 2 ... 20 mS
Resolution 1 μS, 0.01 mS
Accuracy ± 2% of Mb.
ATC 0 ... 50°C / 32 ... 122°F
Calibration 0 μS, 1413 μS, 12.88 mS
   
Measuring function TDS
Measuring range 0 ... 1300 ppm, 1.3 ... 13 ppt
Resolution 1 ppm, 0.01 ppt
Accuracy ± 2% of Mb.
ATC
0 ... 50°C / 32 ... 122°F
   
Measuring function Salinity
Measuring range 0 ... 1000 ppm, 1 ... 12 ppt
Resolution 1 ppm, 0.01 ppt
Accuracy ± 2% of Mb.
ATC 0 ... 50°C / 32 ... 122°F
   
Measuring function Temperature
Measuring range 0 ... 90°C / 32 ... 194°F
Resolution 0.1°C / 0.18°F
Accuracy ± 0.2°C / 0.36°F + 1 Dgt
   
Display LCD display
Power supply     4 x 1.5V AAA battery
Dimensions 195 x 40 x 36 mm / 7.7 x 1.6 x 1.4 in
Weight About 135 g / < 1 lb
   


1 x Water analysis meter PCE-PH 30
1 x pH electrode
1 x Conductivity electrode
1 x pH 4 calibration liquid
1 x pH 7 calibration liquid
1 x 1413 μS / cm calibration fluid
1 x Storage solution
1 x Wrist strap
4 x 1.5V AAA battery
1 x User manual