Water Analysis Meter

With the Water Analysis Meter PCE-CM 41, it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. The Conductivity Tester is very easy to carry everywhere thanks to its small size.

- EC conductivity: 0...2000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2000 mg/l (ppm)  /  20000 mg/l (ppm)
- Temperature: 0.0 ... 60 °C / 32 ... 140 °F
- Water resistant (IP 67)

The water analysis meter PCE-PWT 10 is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

The water analysis meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The water analysis pH meter can be recalibrated by using the calibration solutions that are supplied with the device.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

PCE-T 318 is a digital contact thermometer used to measure temperature in laboratory, industrial and heating, ventilation, air conditioning and refrigeration (HVACR) systems and applications. Compatible with IEC751 PT100, PT500 and PT1000 sensors, this platinum resistance temperature detector (RTD) thermometer includes 1 x 4-wire PT100 class A sensor in the delivery contents. Additional sensors sold separately.

- Measuring range: -100 ... 300°C / -148 ... 572°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± (0.1% of reading + 0.4°C / 0.72°F)

- Measuring range: 0 ... 14 pH
- Resolution: 0.01 pH
- Compact device for wall mounting
- Internal calibration function
- Ideal for continuous monitoring
- Incl. PH electrode PE - 03
- Incl. ISO calibration certificate

The water analysis meter PCE-SM 11 measures conductivity in non-saturated solutions quickly and accurately. The Conductivity Meter PCE-SM 11 has a high measuring accuracy thanks to the automatic temperature compensation.

- Measurement range:  0.0 ... 12.0 % (weight percentage)
- Accuracy: ± 0.5 %
- Resolution: 0.01 %
- Temperature compensation: automatic from 0 to +50 °C / 32 ... 122 °F

The water analysis meter PCE-PH 26F is used to measure the pH of viscous media. Thanks to the flat pH electrode, the water analysis meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the water analysis meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

The PCE-228 water analysis meter is an easy-to-use handheld device for measuring pH, mV and °C. With the PCE-228 water analysis meter, both temperature and pH values can be directly stored onto a SD card (in Excel format), or transferred to a PC through an RS-232 interface.

Measurement range:
- pH: 0.00 to 14.00 pH
- Redox: -1999 to 0 to 1999 mV (only with the optional Redox electrode)
- Temperature: 0.0...65.0 °C or 32 ... 149 °F (only with the temperature sensor)

The PCE-228-Kit includes a multifunctional water analysis meter complete with a PE-03 pH electrode, temperature sensor, SD memory card, batteries, user manual, calibration solution and protective carrying case. The included PCE-288 water analysis meter is an easy-to-use handheld device for measuring pH, mV and °C. With the PCE-228 water analysis meter, both temperature and pH values can be directly stored onto an SD card in Excel format, or transferred to a PC through the RS-232 interface.

Measurement range:
- pH: 0.00 to 14.00 pH
- Temperature: 0.0 ... 65.0 °C or 32 ... 149 °F (via the temperature sensor)
- Redox: -1999 to 0 to 1999 mV