• Voltage Calibrator PCE-123 application frequency
  • Voltage Calibrator PCE-123 application sound
  • Voltage Calibrator PCE-123 application voltage
  • Voltage Calibrator PCE-123 application temperature

Voltage Calibrator PCE-123

Order no.: PCE-123
new
£ 340.00
£ 408.00
4250348700209
PCE-123
1 pc.
price ex. (VAT / delivery)
Delivery time: 1-2 working days

 

Voltage Calibrator indicates the nominal value for simulations and measurement of input
electrical signals such as frequency and temperature
The PCE-123 Voltage Calibrator / nominal value indicator is a device that does need a mains connector and that is used to simulate regulation signals or units en the MSR technique with which it can test and calibrate almost any unit parameter and measuring instrument. The nominal value indicator provides an electrical output signal (mA, mV, V and frequency in Hz as well as temperature in °C or °F). The Voltage Calibrator other automatic graduated functions, and selection of output signal jumps by percentage (0 to 100%) via the up/down keys and direct display of the output value. The device is easy to use and is operated via the keypad. This device is attractive due to its high level of accuracy and its universal range of applications which no electrician or MSR department should go without, as well as within the industrial sector.
This Voltage Calibrator we have on offer is a high quality alternative to those which are normally found on the market.

 - 4 to 20mA (1kΩ, 24V power)
 - 0 to 100.00 mV / 0 to 1,0000V / 0 to 12,000V
 - type-K, J, E, T temperature thermocouple sensors (°C or °F)
 - Frequency range 1 to 62,500Hz
 - Accuracy of 0.025%
 - Operated via keypad
 - Graduated automatic functions
 - Selectable between 0 to 20mA/ 0 to 24mA
 - Input 0 to 100% (mA, mV, V )
 - Alarm beep 'open' (mA) or 'short circuit' (mV, V)

Technical specifications
mA DC current
(maximum load at 1kΩ, powered by 24V)
Range 4 to 20mA / 0 to 20mA / 0 to 24mA
Resolution 1µA
Accuracy ±0.025% ±3µA
Alert beeps when there is a short circuit or ouput current >1mA .
mV current, V DC
(power 1mA)
Ranges 0 to 100.00 mV
0 to 10.000 V
0 to 1.0000 V
Resolution 10 µV
1 mV
1.0000 V
Accuracy ± 0.05% ±30 µV
± 0.05% ±3 mV
± 0.05% ±300 µV
Alert beeps when there is a short circuit or ouput current >10mV.
Temperature sensor thermocouple type-K, J, E, T 
(1 kΩ min.)
Ranges K: -200 ... 0 °C / -328 ... 32 °F and 0 ... 1370 °C / 32 ... 2498 °F
J: -100 ... 0 °C / -148 ... 32 °F and 0 ... 760 °C / 32 ... 1400 °F
E: -10 ... 0 °C / 14 ... 32 °F and 0 ... 700°C / 32 ... 1292 °F
T: -200 ... 0°C / -328 ... 32 °F and T: 0 ... 400 °C / 32 ... 752 °F
Resolution 1°C (across entire range)
Accuracy K: ±1.1°C and ±0.8°C
J:  ±0.9°C and ±0.7°C
E: ±0.9°C and ±0.7°C
T:  ±1.0°C and ±0.8°C
Frequency
Range 1 to 125Hz and 126 to 62.5kHz
Resolution 1 to 125Hz / 1Hz 126 to 62.5kHz / 604 readings 
Accuracy ±0.04Hz
Selection 604 frequencies
General characteristics
Display 5 position LCD
Operating conditions 0 ... 50 °C / 32 ... 122 °F <85% r.h.
Storage conditions -20 ... 60 °C / -4 ... 140 °F; <85% r.h.
Power 1 9V battery or 6 x 1.5V batteries
Consumption 60mA to 180mA (depending on output)
Battery indicator 5.5V for 150mA
Dimensions 88 x 168 x 26mm / 3.4 x 6.6 x 1 in
Weight 330 g / 11.6 oz

Delivery Contents:

1 x PCE-123 Process calibrator
1 x Carrying case
1 x Type-k adaptor
6 x Batteries
1 x Test cables with alligator clips
1 x User's manual