Videoscope
Order no.: PCE-PIC 120
The videoscope PCE-PIC 120 is used to inspect channels and pipes. The videoscope has a fiber optic push cable of 120 m / 393.7 ft. At the end of the videoscope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.
- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable cars
Manufacturer: PCE Instruments
Order no.: VIS 200
The VIS 200 Videoscope or inspection camera serves for the simple analysis of weak spots in wastewater pipes, as well as the maintenance of downpipes and exhaust gas lines. This industrial videoscope camera can either be battery-operated or supplied by power-adapter. The camera equipment is delivered in a hard case, compact and impresses with its easy handling as well as its quick readiness.
- Camera head of Ø 26 mm
- Water-resistant camera head
- Light sensitivity of 0.5 lux
- 7" TFT monitor
- Push rod of 20 m length
- Battery operation up to 4 h
- 12 bright LEDs
Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
Order no.: VIS 250
The VIS 250 Videoscope camera serves for the simple analysis of weak spots in wastewater pipes, as well as the maintenance of downpipes and exhaust gas lines. The industrial videoscope can either be battery-operated or supplied by power-adapter. The camera equipment is delivered in a hard case, compact and impresses with its easy handling as well as its quick readiness. The VIS 250 Videoscope supports electric meter count.
- Camera head of Ø 26 mm
- Camera cable length 20m
- Water-resistant camera head
- Light sensitivity of 0.5 lux
- Memory card
Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
Order no.: VIS 300
With its rotatable camera head, the VIS 300 videoscope provides extraordinary access to hard-to-reach places, offering exceptional viewing options inside narrow tubes, shafts and columns. The camera lens delivers precise pictures of cracks, broken welds or seals to the full-color display. The rotating camera head features:
- 40 mm / 1.58" diameter
- 360° pan with 180° tilt
- 12 white LEDs
Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
Order no.: VIS 350
With its rotatable camera head, the VIS 350 videoscope provides extraordinary access to hard-to-reach places, offering exceptional viewing options inside narrow tubes, shafts and columns. The camera lens delivers precise pictures of cracks, broken welds or seals to the full-color display. The rotating camera head features:
- 40 mm / 1.58" diameter
- 360° pan with 180° tilt
- 12 white LEDs
Includes SD card memory
Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
PCE Instruments' engineers and technicians will be happy to assist you in finding the right videoscope inspection camera to suit your application and desired specifications. Nevertheless, we would like to give you some useful information that will help you make the right decision when selecting your videoscope.
Important factors to bear in mind when looking for a videoscope
- Type of videoscope camera cable
- Needed length / diameter of videoscope camera cable
- Memory for images and videos
- Technical support
Type of videoscope camera cable
A rigid engine videoscope cable usually has a rather small diameter to allow the inspection of very confined spaces. Most industrial rigid videoscopes are analogue, which means that users cannot record and process images and videos without using a special adaptor.
If you still want to process your images and videos, you can purchase an adaptor for your videoscope separately.
Depending on your application, you can choose a videoscope with a rigid or flexible videoscope cable. Flexible cables are available with 2- or 4-way articulating systems. An articulation system enables you to move the videoscope camera head in different directions and angles up to 360 °. Through flexible videoscope cables, images are transferred to the handheld device via a glass fibre bundle or via the camera which is located in the cable. The latter particularly applies to the modern digital videoscopes offered by PCE Instruments. PCE’s flexible videoscope camera cables are available in many different lengths and diameters, which makes our videoscopes suitable for nearly any application.
Needed length / diameter of videoscope camera cable
As mentioned before, PCE’s flexible videoscope camera cables are available in many different lengths and diameters to suit your specific application. Generally, the needed videoscope cable diameter is determined by measuring the openings of the pipes, engines, machine components, etc. to be inspected. The cable length obviously should not be too short. You may want to use your industrial videoscope for several applications which can sometimes mean that you need several cables with different lengths and diameters.
In this case, we recommend you to buy an engine videoscope that accommodates multiple cable diameters and lengths. These have the huge benefit of relatively low follow-up costs as you will not need to buy new cables with different lengths and diameters later on.
Memory for images and videos
Before purchasing a videoscope, make sure to take into consideration if you need the function of recording and storing images and videos of your inspection. Lots of modern digital videoscopes come with a removable SD card that makes it easy to download your images and videos and view them on your computer. Some of PCE Instruments’ videoscope cameras come or are available with an analytical software to evaluate your results. For example, these softwares are very helpful when you want to document the progress of cracks or fractures in your objects of inspection.
Technical support
PCE Instruments offers technical support and qualified customer service. PCE Instruments' engineers and technicians will ask you the right questions to find the best engine videoscope or videoscope camera. For advice, call +44 (0) 2380 987 035 for PCE Instruments UK or +1 (561) 320-9162 for PCE Americas Inc.