Vibration Analyzer Sensor Switch PCE-VS11

Order no.: PCE-VS11

£ 353.00
£ 423.60
PCE-VS11
price ex. (VAT / delivery)

PCE-VS11 Vibration Analyzer Sensor Switch
Setup via USB and PC / Includes software for detailed vibration analysis

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


- Ideal for machine condition monitoring and quality control applications
- Measures RMS and peak value of vibration velocity or acceleration
- Monitoring of frequency domain (FFT)
- Piezoelectric accelerometer
- IP67 ingress protection rating against water and dust
- Features a red and green visual warning or alarm
- Programmable high pass and low pass filters
- Emergency shut-off
- Setup via USB and PC
- Includes software for detailed vibration analysis


Measuring range 0.1 ... 1000 m/s² acceleration
Frequency dependent velocity
2 ... 1000 or 20 ... 10,000 Hz / 360 lines frequency domain
Monitoring values Peak value of vibration acceleration or vibration velocity
RMS value of vibration acceleration or vibration velocity
Frequency domain (FFT)
High pass filter 0.1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1000 Hz acceleration
2 / 5 / 10 / 20 / 50 Hz velocity
Low pass filter 0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 kHz acceleration
1 kHz velocity
FFT limits
Relay output
10 freely selectable frequency intervals with limit amplitudes
PhotoMOS relay
SPST
Max. 60 V / 0.5 A (AC/DC)
Open/close programmable
Connection via screw terminals
Teach-in function
Warning / alarm
Alarm delay / hold time
Button for measuring the switching threshold
Green and red LEDs
0 ... 99 s / 0 ... 9 s
Interfaces USB 2.0 full speed for parameterization and measurement
CDC mode / virtual COM port
Micro USB port inside
External USB port
Power supply voltage
No
5 ... 30 V DC
5 V DC USB
< 100 mA screw terminals
Ingress protection IP67 rating
Operating temp. range -40 ... +80 °C / -40 ... +176 °F
Approx. weight 160 g / 0.36 lb
Approx. dimensions 50 mm / 1.97" Ø
52 mm / 2.05" height
Mounting M8 thread pin
8 mm / ≈ 0.32" length
25 mm / ≈ 0.99" Ø coupling surface

1 x PCE-VS11 vibration analyzer sensor switch
1 x USB cable
1 x PC-compatible software
1 x user manual