PCE Instruments

Roughness Tester

Order no.: HOMMEL ETAMIC W5

This handy product is a mobile roughness tester in the Hommel Etamic series from Jenoptik. This mobile roughness tester is particularly well suited to take quick roughness measurements on machines.


- Measuring range: 320 μ (-210 / + 110)
- Resolution: 5 nm
- Unit: micron / μinch selectable

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: PCE-RT 10

The Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.02 to 100um / 0.78 µinch ... 3940 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 10-ICA

The Roughness Tester PCE-RT 10-ICA is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.


- Measures Ra in Metric (µm) and Imperial (µinch)
- Ra 0.05 to 10um / 2 µinch ... 400 µinch measurement range
- Rz 0.02 to 100um / 0.78 µinch ... 3940 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- With threshold function
- Uses 4 AA Batteries (Included)
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 11

The Roughness Tester PCE-RT-11 is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200

The Handheld Roughness Tester is used to determine surface roughness. The compact surface roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The handheld roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor

- "SWISS MADE" measurement mechanism 
- Accuracy <± 10% and Repeatability <6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 11-ICA

The Roughness Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery
- Inc. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000
The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester PCE-RT 2000 can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The roughness tester PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA

 

The Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The roughness tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The roughness tester PCE-RT 2000-ICA can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The roughness tester PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2200

Meet ISO, ANSI, DIN and JIS standards with PCE-RT 2200, a portable surface roughness tester with an easy-to-read LCD display, large internal memory and convenient USB port.


- 14 Measurement parameters:
  Ra, Rz / Ry (JIS), Rq, Rx, Rt / Rmax, Rp, Rv,
  R3z, R3y, Rz (JIS), Rsk, Rku, Rsm, Rmr
- Graphical LCD display
- Internal memory for 100 records
- USB interface

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2300
The roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote testing and data save.

- Large measuring range:  320 μm (-210 to +110) / 12.6 mil (-8.27 to +4.33)
- Accuracy: ± 10%
- Repeat accuracy: ± 7%
- Touchscreen configuration and bluetooth connectivity 
- Sensor has diamond test head 
- Optional sensors and extension rod for small holes and curved surfaces 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2200-ICA

Meet ISO, ANSI, DIN and JIS standards with PCE-RT 2200-ICA, a portable surface roughness tester with an easy-to-read LCD display, large internal memory and convenient USB port.


- 14 Measurement parameters:
  Ra, Rz / Ry (JIS), Rq, Rx, Rt / Rmax, Rp, Rv,
  R3z, R3y, Rz (JIS), Rsk, Rku, Rsm, Rmr
- Graphical LCD display
- Internal memory for 100 records
- USB interface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote testing and data save.

- Large measuring range:  320 μm (-210 to +110) / 12.6 mil (-8.27 to +4.33)
- Accuracy: ± 10%
- Repeat accuracy: ± 7%
- Touchscreen configuration and bluetooth connectivity 
- Sensor has diamond test head 
- Optional sensors and extension rod for small holes and curved surfaces
- Incl. ISO calibration certificate  
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W10

Roughness Tester Hommel Etamic W10 is a portable instrument for measuring roughness. The roughness tester measures all common roughness variables according to international standards such as DIN EN ISO or ISO MOTIF.


- Measuring range: -210 ... 110 microns (320 microns)
- Measurement units: microns / μ inch selectable
- Max. traversing length: 17.5 mm

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer