Process Calibrator PCE-123

Order no.: PCE-123
£ 397.00
£ 476.40
4250348700209
PCE-123
price ex. (VAT / delivery)
Delivery time: 1-2 working days

Digital, electrical, current, voltage or process calibrator, tester or multimeter for simulation and measurement of standardized electrical signals / control signals as well as frequencies and temperature

The PCE-123 is a network-independent multifunction calibrator used to test and calibrate a variety of parameters of controllers and measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the calibrator useful in a wide range of applications.

The calibrator also has automatic step and ramp functions as well as the possibility to pre-select the output signal steps (0 … 100 %) by using the arrow keys and to directly specify an output value (e. g. 13.8 mA). Operation via the keypad is very easy and intuitive. The PCE-123 multifunctional calibrator is an important tool in any electronics workshop as well as in any measuring and control department in trade, industry and automation.


 - 4 to 20mA (1kΩ, 24V power)
 - 0 to 100.00 mV / 0 to 1,0000V / 0 to 12,000V
 - Type-K, J, E, T temperature thermocouple sensors (°C or °F)
 - Frequency range 1 to 62,500Hz
 - Basic accuracy 0.025 %
 - Easy operation via keypad
 - Automatic ramp function
 - Selectable between 0 to 20mA/ 0 to 24mA
 - Input 0 to 100% (mA, mV, V )
 - Alarm beep 'open' (mA) or 'short circuit' (mV, V)

Technical specifications
mA DC current
(maximum load at 1kΩ, powered by 24V)
Range 4 to 20mA / 0 to 20mA / 0 to 24mA
Resolution 1µA
Accuracy ±0.025% ±3µA
Alert beeps when there is a short circuit or ouput current >1mA .
mV current, V DC
(power 1mA)
Ranges 0 to 100.00 mV
0 to 10.000 V
0 to 1.0000 V
Resolution 10 µV
1 mV
1.0000 V
Accuracy ± 0.05% ±30 µV
± 0.05% ±3 mV
± 0.05% ±300 µV
Alert beeps when there is a short circuit or ouput current >10mV.
Temperature sensor thermocouple type-K, J, E, T 
(1 kΩ min.)
Ranges K: -200 ... 0 °C / -328 ... 32 °F and 0 ... 1370 °C / 32 ... 2498 °F
J: -100 ... 0 °C / -148 ... 32 °F and 0 ... 760 °C / 32 ... 1400 °F
E: -10 ... 0 °C / 14 ... 32 °F and 0 ... 700°C / 32 ... 1292 °F
T: -200 ... 0°C / -328 ... 32 °F and T: 0 ... 400 °C / 32 ... 752 °F
Resolution 1°C (across entire range)
Accuracy K: ±1.1°C and ±0.8°C
J:  ±0.9°C and ±0.7°C
E: ±0.9°C and ±0.7°C
T:  ±1.0°C and ±0.8°C
Frequency
Range 1 to 125Hz and 126 to 62.5kHz
Resolution 1 to 125Hz / 1Hz 126 to 62.5kHz / 604 readings 
Accuracy ±0.04Hz
Selection 604 frequencies
General characteristics
Display 5 position LCD
Operating conditions 0 ... 50 °C / 32 ... 122 °F <85% r.h.
Storage conditions -20 ... 60 °C / -4 ... 140 °F; <85% r.h.
Power 1 9V battery or 6 x 1.5V batteries
Consumption 60mA to 180mA (depending on output)
Battery indicator 5.5V for 150mA
Dimensions 88 x 168 x 26mm / 3.4 x 6.6 x 1 in
Weight 330 g / 11.6 oz

Delivery Contents:

1 x PCE-123 Process calibrator
1 x Carrying case
1 x Type-k adaptor
6 x Batteries
1 x Test cables with alligator clips
1 x User's manual