Pressure Gauge
Order no.: PCE-DMM 11
The pressure gauge PCE-DMM 11 is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the pressure gauge. Thus, the pressure gauge PCE-DMM 11 is ideal for mobile applications, such as test beds.
- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units
Manufacturer: PCE Instruments
Order no.: PCE-DMM 50
The pressure gauge PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure gauge PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure gauge is battery powered. The measuring range of the pressure gauge reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 51
The pressure gauge PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the gauge can be installed both in the food industry as well as in medical technology. The pressure gauge shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure gauge has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-910-ICA
PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.
- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-917-ICA
PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.
- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-DMM 20
The Pressure Gauge PCE-DMM 20 has a two-line display. The pressure gauge can represent pressures up to 600 bar, relative or absolute. The parts of the gauge PCE-DMM 20 that come in contact with liquids are made of stainless steel.
- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1
Manufacturer: PCE Instruments
Order no.: PCE-DMM 21
The pressure gauge PCE-DMM 21 is suitable for flush sanitary installation. The pressure gauge may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure gauge has a food safe FDA approval. The flush mounting of the pressure gauge can be sterilized.
- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display
Manufacturer: PCE Instruments
Order no.: PCE-PDA 1L
The manometer PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The manometer PCE-PDA 1L has many different pressure measuring functions.
- Measuring range pressure: ± 2 kPa / ± 15 mmHg / ± 0.29 PSI
- Resolution: 0.1/1 Pa
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Datalogger and leak test
- Temperature measurement, flow measurement
Manufacturer: PCE Instruments
Order no.: PCE-DMM 60
The pressure gauge PCE-DMM 60 is a precision instrument of the highest standards. The pressure gauge is specifically designed for process monitoring and calibration. This pressure gauge is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.
- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05
Manufacturer: PCE Instruments
Order no.: PCE-DMM 70
The pressure gauge PCE-DMM 70 is a precision instrument for leakage testing. The pressure gauge is specifically designed for leak testing of pipe networks. The actual pressure gauge and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.
- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05
Manufacturer: PCE Instruments
Order no.: GMSD 2 BA
Absolute pressure sensor GMSD 2 BA. Suitable for air and non-corrosive and non-ionizing gases and liquids. Suitable for GMH 3111/3151.
- Measuring range: 0 ... 2000 mbar abs. / 0 ... 29 psi abs.
- Overload: max. 4 bar abs
- Resolution: 1 mbar
Manufacturer: GHM Messtechnik GmbH
Order no.: MSR145-
This thumb-sized Swiss Quality MSR145 Pressure Gauge records over 2 000 000 measured values - with an optional microSD card, even over a billion measured values - and is ideal for long-term measurements. It is capable of simultaneously measuring and recording a variety of measures such as temperature, humidity, pressure, 3-axis acceleration and light.
- Possible parameters: temperature, humidity, pressure, 3-axis acceleration and
light
- Data logger records over 2,000,000 data with an optional microSD card, even
over a billion values
- Parameters, housings, ext. sensors selectable (Configurator)
- USB-interface
Manufacturer: MSR Electronics GmbH
Which pressure indicator is suitable for which application? This question often arises before the purchase of a pressure gauge. This text below is supposed to cover and explain this and other questions.
First, it must be clarified whether the pressure gauge should measure the pressure of air, liquids, gases etc. and visualize it directly on site. In this case, a so-called manometer as a pressure gauge for the measurement task is recommended. 
If, for example, the pressure indicator is to be located in a control cabinet or control center, it is recommended that a pressure transmitter with standard signal output should be used and, as a pressure indicator – a digital display with a corresponding input. This could be, for example, a 0 ... 10 V or 4 ... 20 mA signal. In this case, the external pressure gauge must then be scaled to the measuring range of the pressure transmitter. In concrete terms, this means that if a pressure sensor with a measuring range of 0 ... 16 bar is used, it must be set in the pressure gauge that, for example, an analog measured value of 4 mA corresponds to the pressure of 0 bar. Finally, the upper scale value is defined as follows: 16 bar correspond to a current of 20 mA. The setting process is the same for 0 ... 10 V pressure gauges. Whether a pressure indicator with 0 ... 10 V input or 4 ... 20 mA is used depends on the distance between the pressure sensor and the display. Typically, we recommend a sensor with 4 ... 20 mA as the best solution.
When it goes about pressure gauges or manometers, it is important to pay attention that the device has the correct design for the application. As a rule, for the industrial measurements, the pressure gauges with a standard threaded connection are used. The separation membrane between the sensor and the medium can vary, depending on the application. Here, the pressure displays with stainless steel or ceramic membrane can be selected. For foodstuff applications or hygienic pressure measurements, a pressure indicator with an easy-to-maintain separation membrane is offered. Furthermore, the pressure gauges differ in accuracy. The accuracy of the pressure gauge is always specified by the full end value of the measuring range. Typical accuracy classes of the PCE pressure gauge are 1%, 0.5%, 0.2%. Another option for this type of pressure indicators is the connecting thread itself. For many different applications, the pressure gauges from PCE instruments have ¼ ", ½" ... connecting threads. This always depends on the installation situation.
Should you have specific questions concerning your measurement application of a pressure gauge, do not hesitate to contact us. We would love to help you further.