Dissolved Oxygen Meter
personal protection with datalogger / Optional software and data cable ATEX II 1G EEx ia IIC T4 / ATEX II 2G EEx ia d IIC T4 (EEx ia (d) IIC T3/T4)
This Dissolved Oxygen Meter is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector Gasman warns with a penetrating alarm and an optical signal (useful when there are loud noises in the surrounding area) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. In addition with this gas meter you are able to save measurements and transmit them onto the computer for evaluation. For that, it is necessary to require the additional option of data logger and optional software. The function of logger will allow you to keep all the values in the meter with a quota of measurement from 1 minute to a total of 900 hours. The data saved in the apparatus can be, at any time, transferred onto the computer or laptop for later evaluation. The Gas Leak Detector can be calibrated and certified according to DIN ISO.
In addition it is verified according to the most recent directives (94/9/EG) and disposition on the protection against explosions (ExVo). Every two years recalibrations can be made where you choose the sensor (according to the type of gas) with which the apparatus must be equipped. You will be able to choose between 12 standard sensors, but you can also request other types of special sensors. In addition to the traditional uses of the Gas Leak Detector such as in industry, institutions and investigations, this gas meter is an economic alternative to be used by the fire brigades (with Ex- sensor for inflammable gases). The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.
Another special use is the measurement of the ozone concentration, allowing this small Gas Leak Detector to be complemented with an ozone sensor. You can send us the Gas Leak Detector for maintenance and recalibration, taking into account the indications of the ISO manual of your company (for example, twice a year). The Gas Leak Detector can be dismounted, cleaned, and recalibrated. If a sensor can no longer be calibrated or its period of validity has already expired, you will receive the corresponding information and spare sensors can be found in our online shop. You can request the optional software to set up, calibrate, and adjust the limits of the alarm and the function of the datalogger (also optional) to read the values saved in the Gas Leak Detector. This software represents the data in the form of graphs or tables and it is also possible to export them to other programs.
Notice: The combined charging station serves as interface for the data transmission, the station is used to load the storage cells of the meter of gas for “inflammable gases” + “oxygen” and of interface for the PC for the rest of the models.
|Inflammable gas||CH4||0 ... 100%||20% LEL|
|Oxygen||O2||0 ... 25% v/v||19% and 23% v/v|
|Hydrogen sulfide||H2S||0 ... 100 ppm||5 ppm|
|Carbon dioxide||CO2||0 ... 5 % v/v||0.5 and 1.5% v/v|
|Carbon monoxide||CO||0 ... 500 ppm||30 ppm|
|Sulfur dioxide||SO2||0 ... 20 ppm||1 ppm|
|Chlorine *||CL2||0 ... 5 ppm||0.5 ppm|
|Nitrogen dioxide*||NO2||0 ... 10 ppm||1 ppm|
|Phosphine||PH3||0 ... 5 ppm||0.5 ppm|
|Ammonia||NH3||0 ... 100 ppm||25 ppm|
|Hydrogen||H2||0 ... 1000 ppm||100 ppm|
|Ozone||O3||0 ... 1 ppm||0.1 ppm|
|* With chlorine and dioxide of nitrogen the suction pump cannot be|
used to suction the air in the Air Quality Meterr Gasman II.
|(sensors are exchangeable)||Response time (T90)||Life|
|Methane||20 s||5 years|
|Toxic||20 s||3 years|
|Oxygen||10 s||minimum 1 year|
|Acoustic alarms||85 dB (a) to 1 m of distance (adjustable tone)|
|Tone of regular control that can be disconnected|
|Prolonged tone in case of low battery in the gas meter|
|Optical alarm||Very clear and flashing LED|
|Type of alarm Indicator|
|green LED with low frequency flashing as operating indicator|
|Vibration alarm||Meter vibrates additionally as a complement|
to the optical and acoustic alarms
|Autozero function||In order to adapt the meter to different environmental|
conditions of measurement
(always activate the clean air function)
|Display||LCD with backlight|
|10 mm lines to indicate the gas value|
|Symbols for: Max Hold, Batt Low, calibration|
|ground zero, alarm 1 and 2, 15 min and 8 h, alarms TWA|
|Measurement values memory||max. capacity of 900 h prolonged with measurement|
|quota of 1 min (depends on the gas concentration)|
|Power supply||Toxic gases and oxygen|
|interchangeable lithium battery|
|1 year in normal use conditions|
|in order to load, the charging station is necessary|
|2 cells of nickel-metal hydride|
|(reloadable), 8 ... 10 hours of operative duration|
|Environmental conditions||-20° C ... +55° C / -4° F ... +131° F|
|0 ... 99 % R.H. non condensed|
|Dimensions||90 mm x 48 mm x 24 mm / 3.5 in x 1.9 in x 0.94 in|
|Weight||max. 130 g / 0.29 lbs (battery included)|
|Norms||EN 50014, EN 50020, EN 50018, EN 55022|
|clase B, EN 50081-2, Ex 95C2348X, Ex 65C2349,|
|Ex 95Y1350, IEC 801-3, EN 50082-2|
|IEC 61508, EN 61779, EN 50721|
|Authorisation||EEx ia (d) IIC T3 or T4|
|ATEX II 1G EEx ia IIC T4 (-20 ... +55 °C)|
|(Toxic gases and oxygen)|
|ATEX II 2G EEx ia d IIC T4 (inflammable gases)|
|PC interface||You can request the optional software to set up,|
calibrate and adjust the limits of the alarm and the
function of datalogger (optional too) to read the
values saved in the gas meter. This software represents
the data in form of graphs or tables It is possible to export
them to other programs.
|Please pay attention:||The combined charging station serves as interface|
for the data transmission, the station is used to load
the storage cells of the meter of gas for “inflammable
gases” + “oxygen” and of interface for the PC for the
rest of the models.
|Maintenance and recalibration||You can send us the gas meter for maintenance and|
recalibration, taking into account the indications of the
ISO manual of your company (for example twice a year).
The gas meter can be dismounted, cleaned and recalibrated.
If a sensor no longer can be calibrated or its period of validity
has already exprired, you will receive the corresponding information. The spare sensors will be found in our online shop.
1 x Gas Leak Detector Gasman "Oxygen"
1 x Mounting clips
1 x Battery or Accumulator (depending on the Gas)
1 x User manual