Price excl. VAT &. delivery
2 year Warranty
- Measuring range: 1.2 … 300 mm / 0.04 … 11.81"
- Probe frequency: 2.5 MHz
- Diameter: 12 mm
- Temperature range: -10 ... 60 °C / 14 ... 140 °F
The NDT tester - thickness Meter can measure material thicknesses up to 300 mm. To ensure that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sonic velocity in the NDT tester - thickness Meter. For materials such as steel, aluminium, zinc, silver and gold, the appropriate sonic velocities are already stored in the device library. This means that the NDT tester - thickness Meter can be used universally.
Individual maximum and minimum values can be stored with the NDT tester - thickness Meter's limit value function. If the measured value of the test specimen is outside the limits, the NDT tester - thickness Meter signals this visually. If required, the NDT tester - thickness Meter can also provide acoustic signalling in addition to the visual display. The NDT tester - thickness Meter is therefore used, for example, in quality assurance and incoming goods inspection.
The NDT tester - thickness Meter has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the NDT tester - thickness Meter. The stored data is displayed graphically by the NDT tester - thickness Meter. In addition, each individual measuring point can be approached and read in the graphic of the NDT tester - thickness Meter. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the NDT tester - thickness Meter. The NDT tester - thickness Meter can optionally be equipped with an ISO calibration certificate.
Material thickness | |
Measuring range | 1 mm ... 99.99 mm |
Resolution | 0.01 mm |
Accuracy | ±0.5 % v. Mw. + 0.05 mm |
Material thickness | |
Measuring range | 100 mm ... 300 mm |
Resolution | 0.1 mm |
Accuracy | ±0.5 % v. Mw. + 0.05 mm |
Sensor | |
Designation | PCE-TG 5M10d |
Frequency | 5 MHz |
Temperature range | -10 ... 60 °C |
Measurable materials | Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials |
Minimum diameter of pipes | 30 mm |
Additional description | Standard probe for flat materials |
Dimensions | Ø 10mm x 23.4 mm |
Weight | 39.5 g |
Sensor | |
Designation | PCE-TG 5M6d |
Measuring range | 1 mm ... 50 mm |
Frequency | 5 MHz |
Temperature range | -10 ... 60 °C |
Measurable materials | Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials |
Minimum diameter of pipes | 20 mm |
Additional description | Standard probe for flat materials |
Dimensions | Ø 6mm x 25.3 mm |
Weight | 35 g |
General technical data | |
Units | mm |
Display type | TFT colour display |
Display size | 2.4 inch |
Storage medium | Internal memory |
Memory capacity | 1500 values |
Automatic switch-off from...to | 2 ... 30 min. |
Automatic switch-off can be deactivated | Yes |
Sonic speed adjustable | 1000 ... 9999 m/s |
Menu language | English (US), Chinese |
Protection class (device) | IP52 |
Weight | 230 g |
Dimensions (L x W x H) | 168 x 87 x 35 mm |
Operating conditions | 0 ... 40 °C , 0 ... 90 % r.H |
Storage conditions | 0 ... 40 °C , 0 ... 90 % r.H |
Accumulator/battery | 3x 1.5 V AA battery , alkaline-manganese |
Capacity | 3000 mAh |
Price excl. VAT &. delivery
2 year Warranty
Measurement accuracy: | five parallel gauge blocks with the thicknesses 5 mm; 10 mm; 20 mm; 50 mm and 100 mm |
N.B. The calibration certificate is issued by the PCE calibration service specifically for the customer and is excluded from the right of return.
Price excl. VAT &. delivery
2 year Warranty
ISO re-calibration incl. certificate for material thickness meter. This is often required to comply with DIN ISO 9000.
- Calibration points are: 5; 10; 20; 50 and 100 mm
If your calibration certificate expires, you can easily return your meter for re-calibration.
We carry out the calibration and send you the device with a new calibration certificate.
Calibration certificates are issued specifically for the customer and are excluded from the right of return
Price excl. VAT &. delivery
2 year Warranty