Description
NDT Tester PCE-HT 224E with Digital Display
Mechanical concrete hardness tester with OLED / Measuring range 10 ... 100 N/mm² (1500 ... 8500 lbs/in² / Built-in battery for mobile use / Test load 2.207 J / For measuring the quality of concrete surfaces
The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester. Thus, the NDT Tester finds its essential application in the construction and in the construction sector. The NDT Tester is also suitable for testing the hrdness of rolled paper. The built-in mechanism on the hardness tester always ensures the same impact energy of 2.207 Nm.
The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm². The NDT Tester can be setup to measure at test angles of downward(-90°), downward(-45°), horizontal (0°), upward(45°), or upward(90°).
Highlights
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- OLED for reading the measured values
- USB interface for connection to a PC
- Measuring range 10 ... 100 N/mm², 1500 ... 8500 lbs / in²
- Measurement of the hardness of concrete
- Data storage for later analysis
- Rechargeable battery for mobile use
Specification
Measuring range | 10 ... 100 N/mm² / 1500 ... 8500 PSI or lbs/in² |
Accuracy | ± 0.1 R |
Display | OLED |
Nominal kinetic energy | 2.207 Nm, 0.225 kgm |
Interface | micro USB |
Storage | 1,000 data units with 256 measurements each |
Operating conditions | -40 ... 60°C / -40 ... 140°F |
Power supply | 3.7V Li-ion battery |
Power supply (mains adapter) | Primary: 100 ... 240V AC, 50/60 Hz |
| Secondary: 5V DC, 1 A |
Dimensions | 280 x 75 x 60 mm / 11 x 3 x 2.4 in |
Weight | About 1.2 kg / 2.6 lbs |
| |
Delivery Scope
1 x NDT Tester - Hardness Tester PCE-HT 224E
1 x Mini USB cable
1 x Emery stone
1 x Software in the download area
1 x Charger
1 x Transport case
1 x Instruction manual
Accessories
Accessories
£ 181.00
Price excl. VAT &. delivery
2 year Warranty
an ISO calibration certificate for hardness testers.
- Certificate lists all measured values, confirming the device meets the applicable ISO standard(s)
- Each ISO calibration certificate is personalized for the customer; therefore, ISO calibration certificates are exempt from the right of return
- Based on DIN EN 12504-2:2021