NDT Test Instruments
Order no.: PCE-TG 300
The PCE-TG 300 is a NDT test instrument with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. For damping or scattering materials such as plastic or cast a special sensor is available.
Measuring range:
PE: pulse-echo mode 0.65 ... 600 mm (steel)
EE: echo-echo mode 2.50 ... 60 mm
Accuracy:
± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
H refers to the material thickness of the workpiece
Resolution: 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Manufacturer: PCE Instruments
Order no.: PCE-CT 100N
The NDT tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials.
- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via wifi and USB
- Two different probes for NFe and Fe (included)
Manufacturer: PCE Instruments
Order no.: PCE-CT 90
The NDT tester is a versatile measuring device. This is made possible by the various optional sensors on the NDT tester. Thanks to the surface temperature sensor, the NDT tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F.
- Measuring range standard sensor : 0 ... 60 mm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-PIC 20
The NDT tester inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.
- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Order no.: PCE-IGM 100
A gloss meter is a tester for determining surface gloss. Thereby, with the gloss meter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.
- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
Manufacturer: PCE Instruments
Order no.: PCE-PIC 40
The PCE-PIC 40 NDT tester inspection camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.
- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Order no.: PCE-PIC 50
The wifi NDT tester inspection camera PCE-PIC 50 is an ideal companion for the investigation of pipelines. The wifi NDT tester inspection camera PCE-PIC 50 has a waterproof camera head with a diameter of 30 mm. The tube of the Wifi NDT tester inspection camera PCE-PIC 50 has a length of 30 meters / 98 ft.
- Connection to a smartphone via WLAN
- 30 meters / 98 ft cable length
- Camera head diameter: 30 mm
- Display: 7" LCD (800 x 480 pixels)
- Self-aligning camera
- Memory: SD card up to 32 GB
Manufacturer: PCE Instruments
Order no.: PCE-PIC 60
The NDT tester inspection camera PCE-PIC 60 is used to inspect channels and pipes. The NDT tester inspection camera has a fiber optic push cable of 60 m. At the end of the NDT tester inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.
- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Order no.: PCE-PIC 120
The NDT tester inspection camera PCE-PIC 120 is used to inspect channels and pipes. The NDT tester inspection camera has a fiber optic push cable of 120 m / 393.7 ft. At the end of the NDT tester inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.
- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments