Moisture Meter

Order no.: PCE-MA 110

PCE-MA 110 is a halogen moisture meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- RS-232 interface or port

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 202

The moisture meter PCE-MA 202 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 10 mg / 0.01 g / 0.1%
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 100

The moisture meter PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by a halogen lamp up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 200

The moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 50X
The moisture meter PCE-MA 50X is an innovative solution for the fast and highly accurate determination of moisture in a wide variety of materials. The precision weighing scale uses weighing technology from the moisture meter range and is operated in combination with a drying chamber.

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PM5

PM5 is a portable handheld paper moisture meter used to take accurate nondestructive measurements of the moisture content or water content and temperature of cardboard and paper products. Ideal for stacks and rolls of paper products and warm running rolls and stationary cold rolls. Infrared temp sensor and optional bluetooth for data transfer.


- Moisture content range: 1 ... 25%
- Temperature range: 0 ... +80 °C / +32 ... +176 °F
- Accuracy: ±1 %, ±1 °C
- Measuring depth to 50 mm
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: PCE-MWM 230

VHF-Band Moisture Meter Crushed Stone, Gravel, Ore (conveyor). The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 145 °C. The moisture meter probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors. Due to pluggable design this version of the moisture meter can also be used for soil moisture control.

- Measurement range: 0 ... 100 %
- Limits of error: <0.5% below 10% moisture
- Range of working temperatures:
  0 ... +90 °C (industrial version)
  0 ... +115 °C (extended temperature range) 
  0 ... +250 °C (drying kilns)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this humidity sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.


- Option 1 (PCE-MWM 240-A): Stainless bar sensor (length 250 mm)
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Operating temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this in-process moisture meter for bulk materials can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.


- Option 2 (PCE-MWM 240-B): Rod sensor (length 500 ... 1500 mm)
- Measuring range: 0 ... 100%
- Operating temperature range: 0 ... +80 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 200

The moisture meter is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture meter is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).


- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction)
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A-315

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5 to 55 °C / 41 to 131 °F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture meter for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture meter for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RH-2

The Moisture Meter RH-2 can measure various parameters with various sensors for relative and absolute air humidity, temperature, dewpoint as well as water activity in woods. The equilibrium moisture content of the thermal dewpoint calculator indicates the relative ambient humidity, which the material has an equilibration with, and thus is unable to absorb or to emit any more humidity. The absolute humidity of the moisture meter detects the percentage of water content based on gross weight of the material.


- Very fast matching behavior
- Long-term stable sensors (sensors optional)
- Easy storage of measured values
- Documentation of the measurement
- Multilingual menu navigation
- Sensors not included 

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FS-1

Moisture Meter FS-1 measures the moisture content in corn and legumes very accurately. Thanks to the Moisture Meter, the user is now able to determine the water content in freshly delivered materials.


- Measuring range: 5 ... 30%
- Resolution: 0.1%
- Accuracy: ±1%
- Sample amount up to 100 ml
- Rated IP40
- Automatic Temperature Compensation (ATC)

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FMW-B

The Moisture Meter FMW-B determines moisture content by means of the capacitive method. With the Moisture Meter an electromagnetic field quickly determines capacitance of wood. This moisture meter is very easy to use as well as very robust.


- Measurement range: 2 ... 30% H2O wood / 0 ... 60% building materials
- Resolution: 0.1%
- Accuracy: ±0.5% of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: P2

P2 is a digital paper moisture meter used primarily for kraft paper, brown paper, wrapping paper, packaging paper, cardboard and paperboard. This easy-to-use portable handheld paper moisture meter takes quick and highly accurate nondestructive measurements of paper moisture.


- Moisture measuring range: 3 ... 10% water content
- Resolution: 0.1% water content
- Automatic temperature compensation

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FMC

The Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FME

FME is a handheld multifunction moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: LM 6

The LM 6 leather moisture meter is an easy-to-use portable handheld humidity detector used to measure the moisture of leather goods in a nondestructive manner. No pretreatment of samples required. The LM 6 measures various degrees of moisture for a wide range of leather products -- from wet blue to dry leather.


- Large measuring range, from 3% to 65% water content
- Takes measurement within seconds
- Automatic temperature compensation
- High accuracy


Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer