Material Tester

Material Tester PCE-XXM 30
£ 319.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The material tester is designed for fast and precise color measurements of surfaces. The color ranges CIE-LAB, CIE-LCh, HunterLab, CIE-Luv, XYZ, RGB of the color can be determined with the material tester.

- Measuring aperture: Ø8 mm / 0.31"
- Wavelength interval: 10 mm / 0.39"
- Wavelength: 400 ... 700 nm
- Battery life for approx. 10,000 measurements
- Bluetooth interface
Requires free app for Android only in Playstore (PCE-XXM 30) to use all features
- Various adjustable light sources
Material Tester PCE-XXM 30-ICA incl. ISO Calibration Certificate
£ 703.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The material tester is designed for fast and precise color measurements of surfaces. The color ranges CIE-LAB, CIE-LCh, HunterLab, CIE-Luv, XYZ, RGB of the color can be determined with the material tester.

- Measuring aperture: Ø8 mm / 0.31"
- Wavelength interval: 10 mm / 0.39"
- Wavelength: 400 ... 700 nm
- Battery life for approx. 10,000 measurements
- Bluetooth interface
Requires free app for Android only in Playstore (PCE-XXM 30) to use all features
- Various adjustable light sources
- incl. ISO Calibration Certificate
Material Tester PCE-CT 26FN
£ 177.00
Price excl. VAT &. delivery
2 year Warranty
The PCE-CT 26FN material tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN material tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Material Tester PCE-CT 26FN-ICA Incl. ISO Calibration Certificate
£ 316.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-CT 26FN material tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN material tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Material Tester PCE-DDA 10-ICA incl. ISO Calibration Certificate
£ 699.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-DDA 10 shore Material Tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 Material Tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

Material Tester PCE-DDD 10 Shore D
£ 560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDD 10 Shore D Material Tester is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital Material Tester has a reading accuracy of 0.1 hardness units. The Material Tester comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore D hardness testing
- Single and serial measurements
- Data transfer to PC

Material Tester PCE-DDD 10-ICA incl. ISO Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-DDD 10 shore Material Tester is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.


- Handheld device
- For Shore D measurements
- Single and Serial measurements
- Data transfer to PC
- Incl. ISO Calibration Certificate

Material Hardness Tester for Metal PCE-2600N
£ 1,279.00
Price excl. VAT &. delivery
2 year Warranty

The Material Hardness Tester for Metal PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N to determine the surface hardness of many metals. The material tester PCE-2600N is especially suitable for quality or product inspection.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.8%
- Impactor: DL
- Display: 128 x 64 OLED

Material Hardness Tester for Metal with ISO Certificate PCE-2600N-ICA
£ 1,506.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Material Hardness Tester for Metal PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N-ICA to determine the surface hardness of many metals. The material tester PCE-2600N-ICA is especially suitable for quality or product inspection.

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.8%
- Impactor: DL
- Display: 128 x 64 OLED
- Includes ISO calibration certificate

Material Hardness Tester PCE-2900
£ 1,563.00
Price excl. VAT &. delivery
2 year Warranty

The material hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The material hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The material hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.6%
- Impactor: Type D
- USB and WiFi for data transmission

Material Hardness Tester PCE-2900-ICA incl. ISO Calibration Certificate
£ 1,776.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The material hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The material hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The material hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.6%
- Impactor: Type D
- USB and WiFi for data transmission
- Incl. ISO Calibration Certificate

Material Hardness Tester PCE-DD-D Shore D
£ 88.00
Price excl. VAT &. delivery
2 year Warranty

PCE-DD-D is a Shore D durometer or material hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.


- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
  thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade


Material Tester PCE-DD-A Shore A
£ 88.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DD-A material tester is used to measure Shore A hardness in soft gums, rubber, elastomers and more. Calibration is not available for this item.

- Measurement area: 0 ... 100 Shore A
- Resolution: 0.5
- Accuracy: ± 1
- Depth of indentation: 0 ... 2.5 mm / .1 in
- Indenter: 35°

 

 

Material Tester PCE-CRC 10
£ 124.00
Price excl. VAT &. delivery
2 year Warranty

The Material Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Material Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, material testers are used in a wide range of industries.


- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

Material Thickness Tester PCE-CT 25FN
£ 124.00
Price excl. VAT &. delivery
2 year Warranty

The material thickness tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this material thickness tester does not have to differentiate between ferrous and non-ferrous metal.

- Measuring range:  0 ... 1500 µm
-  Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
- Measuring accuracy: ± (3% + 1 µm)
- Resolution: 0.1 µm in the measuring range 0 ... 100 µm
                      1 µm in the measuring range> 100 µm
Material Tester PCE-GMM 10
£ 228.00
Price excl. VAT &. delivery
2 year Warranty
The material tester PCE-GMM 10 is a compact moisture analyzer for up to 18 different cereals. This material moisture meter is an important tool in mills, granaries or in processing industries of cereals and legumes.

- For 18 cereals
- Small amount of sample
- Temperature compensation: automatic
Material Thickness Tester PCE-CT 25FN-ICA incl. ISO Calibration Certificate
£ 266.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The material thickness tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this material thickness tester does not have to differentiate between ferrous and non-ferrous metal.

- Measuring range:  0 ... 1500 µm
-  Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
- Measuring accuracy: ± (3% + 1 µm)
- Resolution: 0.1 µm in the measuring range 0 ... 100 µm
                      1 µm in the measuring range> 100 µm
- incl. ISO Calibration Certificate
Material Tester PCE-CT 22BT
£ 324.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this Material Tester, layer thicknesses on metallic surfaces can be reliably determined. The Material Tester has a measuring range of 1500 µm. This means that the Material Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values