2 year Warranty
PCE-PCM 1 is a multipurpose HVAC meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.
The HVAC meter has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the HVAC meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.
Adjustable high/low sensitivity:6 g/yr or 30 g/yr for R-22 and R-134a8 g/yr or 40 g/yr for R404A, R-407C and R-410A
The HVAC meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the HVAC meter, or you can use the integrated clamp mechanism. By using the clamp of the HVAC meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
Without a doubt, the main advantage of this handheld cup vane HVAC meter is that it doesn't need to be held exactly in the direction of the wind. HVAC meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane HVAC meter, wind direction will not influence the measurement.
The HVAC meter determines the wind speed via an impeller with a diameter of 65 mm. The HVAC meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.
The HVAC meter records the air temperature and humidity and stores them internally. The compact HVAC meter with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses…)
HVAC meter for measuring AC/DC current, AC voltage and resistance. This HVAC meter is designed to indirectly detect AC/DC current and ohms. The HVAC meter has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The HVAC meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.
The HVAC meter is an independent measuring device for determining temperatures between -40 … 125 °C. The HVAC meter is therefore particularly suitable for monitoring particularly hot environments.
The HVAC meter has a measuring range of -80 … +70 °C. The HVAC meter is therefore suitable for monitoring particularly cold environments.
The HVAC Meter PCE-P15 Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.
The HVAC Meter PCE-P30 Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.