HVAC Meter / HVACR Tester

Order no.: PCE-GA 10
The HVAC Meter PCE-GA 10 is used to check for leaks in gas pipes and connections. This HVAC meter is suitable for many combustible gases. The HVAC meter has 5 LEDs that inform the gas intensity.

- Up to 15 gases
- For flammable gases
- 400 mm / 15.7 in sensor
- Visual, audible and haptic alarm
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THA 10

The HVAC Meter PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the HVAC Meter measures the temperature, humidity, dew point, the wet bulb temperature and the air volume.


- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m3 / s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 112
The HVAC meter PCE-HT 112 is compact, very small and equipped with a display. The PCE-HT 112 HVAC meter records the temperature and humidity indoors with its integrated sensor and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -30 ... 65°C / -22 ... 149°F (Internal)
                          -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% RH (Internal & External)
- Memory for 25,920 readings
- Saves as PDF
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01

PCE-P01 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- 0.001 to 0.137 bar (0.001 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P05

PCE-P05 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- 0.001 to 0.344 bar (0.001 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 882

PCE-EM 882 is a portable, handheld, multifunctional digital device capable of measuring four different physical parameters. An ideal tool for use in industrial hygiene, HVAC performance assessment and environmental condition monitoring applications, this easy-to-use measuring instrument includes sensors for measuring sound, light, temperature and relative humidity.


- Sound: Low and high A- and C-weighted noise measurements
  from 35 ... 130 dB
- Light: 20, 200, 2000, 20000 lux ranges
- Temperature: Range from -20 ... 750ºC / -4 ... 1400ºF
- Relative humidity (RH): Range from 25 ...95% RH 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 114
The refrigerator HVAC meter PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 HVAC meter records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AM 85
The compact HVAC meter PCE-AM 85 is an ideal companion for every outdoor activist. This lightweight HVAC meter with altimeter and barometer function should not be missing on any tour. The HVAC meter PCE-AM 85 informs you about the reached altitude of -2000 ... 9000 m / -6,561 ... 29,527 ft.

- Altimeter up to 9,000 m / 29,527 ft
- Air pressure (absolute)
- Wind speed
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose HVAC meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GA 12
The HVAC meter PCE-GA 12 is a very easy-to-use measuring device. This HVAC meter detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the HVAC meter. 

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1

HVAC Meter PCE-LCT 1 to test leakage / RMS measurement / continuity and resistance test.


- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A420

Without a doubt, the main advantage of this handheld cup vane HVAC Meter is that it doesn't need to be held exactly in the direction of the wind. HVAC Meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane HVAC Meter, wind direction will not influence the measurement.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41

The HVAC meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the HVAC meter, or you can use the integrated clamp mechanism. By using the clamp of the HVAC meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LD 1

PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.


- Adjustable high/low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 50
The HVAC meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the HVAC meter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 888

PCE-EM 888 is a portable handheld HVAC meter ideal for monitoring environmental conditions and the performance of heating, ventilation and air conditioning (HVAC) systems. This multifunctional digital device is used to measure wind speed, volumetric air flow, temperature, relative humidity, light and barometric pressure.


- Wind speed
- Volumetric air flow
- Air temperature
- Relative humidity
- Type K thermocouple sensor
- Barometric pressure
- Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P15

PCE-P15 is an HVAC meter or differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 1.034 bar / 0 to 15 psi
- Resolution: 0.001 bar / 0.01 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 318

PCE-T 318 is an HVAC temperature meter or digital contact thermometer used to measure temperature in laboratory, industrial and heating, ventilation, air conditioning and refrigeration (HVACR) systems and applications. Compatible with IEC751 PT100, PT500 and PT1000 sensors, this platinum resistance temperature detector (RTD) thermometer includes 1 x 4-wire PT100 class A sensor in the delivery contents. Additional sensors sold separately.

- Measuring range: -100 ... 300°C / -148 ... 572°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± (0.1% of reading + 0.4°C / 0.72°F)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 3-ICA
The PCE-CM 3 HVAC meter is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 HVAC meter is plugged over the live conductor. The HVAC meter PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC1-ICA
This HVAC meter was developed for the indirect acquisition of AC / DC currents as well as the frequency. A non-contact voltage tester function and a flashlight for illuminating the measuring point were also integrated in this HVAC meter. 

- AC / DC current, AC voltage and frequency measurement
- Integrated measuring point illumination
- Non-contact voltage tester
- Automatic range selection
- Forceps opening: 18 mm
- Automatic switch-off
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer