HVAC Meter / HVACR Tester

Order no.: PCE-ST 1

The PCE-ST 1 HVAC Meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The PCE-ST 1 HVAC Meter is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MAM 2

PCE-MAM 2 is a lightweight portable handheld pocket-sized mini anemometer, wind speed meter or air velocity measuring device with an impeller wheel sensor that is ideal for determining air or wind speeds inside or out. This mini anemometer allows you to take velocity and temperature measurements quickly and on the spot.


- Velocity measuring range: 0.4 ... 30 m/s (0.9 ... 67 mph)
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Displays velocity measurements in m/s, km/h, mph, knots or ft/min
- Impeller wheel sensor for air or wind speed
- Colour display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-660
The HVAC meter PCE-660 has a very good price / performance ratio. This lightweight HVAC meter is also characterized by the simplest operation and the red light beam. So you can accurately aim the digital HVAC meter beam onto the object.

- Measuring range: - 50 ... 380 °C / -58 ... 716 °F
- Accuracy: -50 ... 0 °C : ± 4°C / -58 ... 32 °F : ± 7.2 °F
- Resolution: 0.1 °C / 0.18 °F
- 13:1 optical resolution
- Adjustable emissivity
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TH 5

The HVAC Meter PCE-TH 5 is a universal temperature / humidity gauge which allows the measurement of both the ambient temperature and the ambient humidity, as well as the determination of the dew point and wet bulb temperature.


- Temperature measuring range: -20 ... 50°C / -4 ... 122°F
- Humidity measuring range: 0 ... 99.9% r.H.
- Resolution: 0.1°C / 0.18°F, 0.1% relative humidity
- Measurement accuracy: ±3% r.H. / ±0.6°C / 1.08°F
- Calculation of dew point and wet bulb temperature

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-777N

The HVAC Meter PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small HVAC Meter is characterized by simple operation and the red sighting tool.


- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TT 3

The digital HVAC meter PCE-TT 3 is an easy-to-use measuring device for intensive work in all industrial sectors such as maintenance and repair. The equipment has overvoltage category CAT III 600 V.

- DC voltage
- AC voltage (40-400 Hz)
- DC current
- AC current (50-400 Hz)
- Resistance
- Large, high-contrast LCD display
- Automatic range selection
- Data hold function
- Diode test
- Continuity tester

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-670
HVAC meter PCE-670 for non-contact measurement of surface temperature. The PCE-670 HVAC meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BDA 10
The Bluetooth HVAC meter PCE-BDA 10 is an optimal measuring device for heating and plant technicians. The Bluetooth HVAC meter is an easy-to-use meter. 

- Air flow: 1 ... 25 m / s
- Temperature: 0 ... 50°C / 32 ... 122°F
- iOS and Android app
- Bluetooth
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 3
The PCE-CM 3 HVAC meter is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 HVAC meter is plugged over the live conductor. The HVAC meter PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC1

The PCE-DC1 HVAC meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
- Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 72
The HVAC meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the HVAC meter PCE-HT 72 to use up to several months. The PCE-HT 72 HVAC meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

- Measuring range Temp.: -30 ... 60°C / -22 ... 140°F
- Measuring range rel. Humidity: 0 ... 100% rh
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T312N
The PCE-T312N HVAC meter is a two-channel measuring instrument. The PCE-T312N HVAC meter offers a wide range of measurement options. 

- K-type thermometer with dual input
- Temperature range: -210 ... 1372°C / -346 ... 2501°F
- Direct measurement / differential measurement (T1-T2)
- Electronic zero offset
- Readings in °C, °F or Kelvin (K)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC2

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 50
The HVAC meter PCE-VE 50 is a compact video endoscope for the visual inspection of difficult to access areas. The camera head of the HVAC meter PCE-VE 50 on the semi-rigid cable transmits images directly to the LC display. 

- Camera diameter: 8 mm
- Cable length: 770 mm
- Image sensor: 1/9 ", CMOS
- Effective pixels: 640 x 480 pixels
- Interface: Video connection via 3.5 mm jack
- Protection class: IP67 (camera hose only)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BDP 10
The Bluetooth HVAC meter PCE-BDP 10 is used to quickly and easily check the differential pressure. The Bluetooth HVAC meter PCE-BDP 10 finds its application, for example, in the ventilation and air conditioning technology with the help of a smartphone to measure the gas flow pressure or the static pressure.

- Measuring range: ± 2 PSI
- Measurement accuracy: ± 0.006 PSI (0 ... 0.2 PSI)
- Resolution: 0.001 PSI
- Android and iOS app
- Bluetooth interface
- 11 different units
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC3

HVAC Meter PCE-DC3 to determine indirectly, the AC/DC currents with high accuracy.


- AC current (50 / 60 Hz): 2 A  / 1-mA / ± 2.8% + 10 dgt
- DC current: 2 A / 1-mA / ± 3.0% + 10 dgt
- AC overload protection: 100V AC up to 600V AC 50 / 60 Hz

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITF 10

PCE-ITF 10 is a portable handheld HVAC meter, infrared thermometer gun or laser pyrometer that uses an infrared (IR) sensor to measure temperature in degrees Celsius (°C) or Fahrenheit (°F) without contact. This non-contact IR temperature meter can be used to detect leaks in walls, windows, doors and heating, ventilation and air conditioning (HVAC) systems.


- Measuring range: -50 ... 380°C / -58 ... 716°F
- Accuracy: ± 3% -50 ... 20°C / -58 ... 68°F
                 ± 1% / ± 1°C / 1.8°F, 20 ... 380°C / 68 ... 716°F
- Optical resolution: 20:1
- Spectral range: 8 ... 14 μm
- Fixed emissivity: 0.95

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GIR 10
The PCE-GIR 10 HVAC meter is used to assist with maintenance and servicing in industry and craft. Thanks to the flexible gooseneck, the HVAC meter can also be used under difficult conditions. 

- Temperature measuring range: -50 ... 600°C / -58 ... 1112°F
- Measuring spot (measuring distance to measuring point size ): 8: 1
- Spectral sensitivity: 8 ... 14 μm
- Fixed emissivity 0.95
- Visible single-point laser beam
- Sensor on the gooseneck
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 886

PCE-EM 886 is a portable handheld multifunctional digital device used to measure sound, light, humidity, temperature, AC / DC current, electrical resistance, capacitance and frequency.


- Sound: 35 ...100 dB
- Light: 4,000 ... 40,000 lux
- Humidity: 33 ... 99% RH
- Temperature: 0 ... 50°C Indoor, -20 ... 1300ºC Type K
- Auto-ranging electrical multimeter

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible HVAC meter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible HVAC meter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
Test Instruments manufacturer