HVAC Meter / HVACR Tester

Order no.: PCE-CM 40-ICA
The flexible HVAC meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible HVAC meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA HVAC meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA HVAC meter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The HVAC Meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC Meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 24
The IR HVAC Meter PCE-TC 24 is a picture-in-picture thermal camera. This IR HVAC meter measures the temperature between -20 and 380 °C without contact. The IR HVAC meter is suitable for fast and simple temperature measurements in the house, switch cabinets etc. 

- Measuring range: -20 ... 380 °C
- Field of view: 32 x 32 °
- Frame rate: 9 Hz
- Picture-in-Picture function
- Micro-SD card memory
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41-ICA

The HVAC meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the HVAC meter, or you can use the integrated clamp mechanism. By using the clamp of the digital HVAC meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 250
The HVAC Meter PCE-VE 250 is a diagnostic tool with integrated cleaning function. This makes the HVAC Meter PCE-VE 250 ideal for use on machine components. The cleaning can be done either with compressed air or compressed air in conjunction with water and or detergents. 


- Videoscope with cleaning function
- Diameter camera head: 8.5 mm / 0.33 in
- Cable length: ca. 90 cm / 2ft 11 in
- 3.5" TFT LC-Display
- 4x optical zoom
- Viewing angle 60°   
- 6 white, dimmable LEDs on the camera head 
- Memory option on Micro SD card
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 HVAC meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the HVAC meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 120
The HVAC meter PCE-HT 120 is used to measure temperature and humidity. The measurement data from the HVAC meter are displayed in an app on the tablet or smartphone and the display.

Measuring function
- Humidity
- Temperature
- Dew point
- Wet bulb temperature
- Ethernet: WLAN / WIFI
- Accespoint and client mode
- Connection for external PT1000 sensor
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3-ICA

PCE-HVAC 3 is a HVAC meter or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the HVAC meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 HVAC meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313 S

The PCE-313 S HVAC Meter has been designed for professional use in fields such as the air-conditioning sector. The PCE-313 S HVAC Meter determines both relative humidity and ambient temperature. The PCE-313 S HVAC Meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.54 ... 120°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 420
The HVAC meter records humidity and air temperature and stores it internally. This compact and robust HVAC meter in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate chambers).

- Temperature: -40 ... 70°C / -40 ... 158°F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6°F)
- Operating temperature: -40 ... 80°C / -40 ... 176°F, max. 80% rF
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01-ICA

PCE-P01 is a portable handheld digital HVAC meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P05-ICA

PCE-P05 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- 0.001 to 0.344 bar (0.001 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200SV1

The PCE-VE 200SV1 HVAC meter is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 HVAC meter is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the HVAC meter PCE-VE 200SV1.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 1 m / 3.3 ft 
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 25
The PCE-TC 25 IR HVAC meter with built-in digital camera helps detect thermal problems in electrical installations, detect mechanical faults, perform preventive maintenance and save energy.

- Measuring range: -20 ... 380 °C
- Measures e.g. dew point & humidity
- Field of view: 32 x 32 °
- Frame rate: 9 Hz
- Picture-in-picture function
- Micro-SD card memory
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-JR 911

The PCE-JR-911 HVAC Meter with Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This HVAC Meter comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week.


- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-893
The HVAC meter PCE-893 is suitable for simple temperature measurements. The emissivity of the surface can be adjusted on the PCE-893 HVAC meter. Thus, the HVAC meter PCE-893 is suitable for almost all surfaces.

Infrared measurement
- Measuring range: -50 ... 1200 °C / -58 ... 2192 °F
Thermoelement  
- Measuring range: -50 ... 1370 °C / -58 ... 2498 °F
- Optical resolution 50:1 infrared optics
- Adjustable emissivity
- Thermocouple type-K can be connected
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The HVAC Meter PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The HVAC meter is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P15-ICA

PCE-P15 is an HVAC meter or differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 1.034 bar / 0 to 15 psi
- Resolution: 0.001 bar / 0.01 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P30-ICA

PCE-P30 is an HVAC meter used to measure gauge and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.


- Pressure measuring range: 0 to 2.068 bar / 0 to 30 psi
- Resolution: 0.001 bar / 0.02 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer