Humidity Detector

Humidity Detector PCE-AQD 10
£ 405.00
Price excl. VAT &. delivery
The humidity detector is used to measure air quality. The humidity detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the humidity detector is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% RH
  • Measuring range: 0 … 50 °C / 32 … 122 °F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
Humidity Detector with Air Flow Hoods PCE-VA 20-SET
£ 410.00
Price excl. VAT &. delivery

PCE-VA 20-SET is a humidity detector with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1°C / 0.18°F
  • Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

Humidity Detector PCE-HT 300
£ 415.00
Price excl. VAT &. delivery
The humidity detector PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The humidity detector stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
  • Temperature: -10 … 80°C / 14 … 176°F
  • Dew point: -10 … 80°C / 14 … 176°F
  • Humidity: 0 … 100% RH
  • 16 GB of memory
  • Storage as CSV
Humidity Detector PCE-RCM 12
£ 416.00
Price excl. VAT &. delivery
The humidity detector PCE-RCM 12 is used for indicative testing of environmental parameters. The humidity detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the humidity detector provides information about these parameters. 


  • Fine dust, CO2, formaldehyde, humidity, temperature
  • Particle size channels: PM 2.5 / PM 10
  • Temperature measuring range: -20 … 70°C / -4 … 158°F
  • Humidity measuring range: 0 … 100% r.H.
  • Formaldehyde measuring range: 0.00 … 5.00 mg/m³
  • CO2 measuring range: 0 … 9999 ppm
  • For indicative measurements
Humidity Detector PCE-G 2
£ 430.00
Price excl. VAT &. delivery
The humidity detector is used to measure the environmental parameters of temperature and humidity. The humidity detector is used in warehouses, open-plan offices, schools, etc.

  • Measuring range temperature: -40 … 85 °C
  • Measuring range humidity: 0 … 99 % r.H.
  • 55 mm character height
  • Up to 30 m reading distance
  • External sensor (wired)
Humidity Detector PCE-PMI 4
£ 432.00
Price excl. VAT &. delivery
The humidity detector is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the humidity detector are pressed onto the surface to be tested. Within seconds, the humidity detector will show the moisture content to the operator.

  • Relative scale: 0 … 100%
  • Accuracy: ± 0.5%
  • Resolution: 0.1%
  • For measuring the moisture in concrete and screed
  • Numeric and graphical view
  • Eight spring electrodes are used for the measurement
Humidity Detector PCE-AQD 50A-ICA incl. ISO-Calibration Certificate
£ 445.00
Price excl. VAT &. delivery
ISO Calibration
The Humidity Detector is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Humidity Detector is equipped with various sensors.
Parameters / Measuring ranges:

  • Temperature: 0 ... +50 ºC / 32 ... 122 ºF
  • Ambient humidity: 0 ... 100% RH
  • Atmospheric pressure: 300 ... 2000 hPa
  • CO2: 0 ... 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months
  • incl. ISO-Calibration Certificate
Multifunction Handheld Humidity Detector PCE-MMK 1
£ 450.00
Price excl. VAT &. delivery
Topseller

PCE-MMK 1 is a portable digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction handheld humidity detector also measures ambient temperature and ambient relative humidity.


Measuring ranges:

  • Wood, paper, textiles: 1 … 75% moisture
  • Concrete, building materials: 0.1 … 2.4% moisture
  • Ambient temperature: -40 … 70°C / -40 … 158°F
  • Ambient relative humidity (RH): 0 … 100 % RH

Handheld Humidity Detector PCE-320-ICA incl. ISO Calibration Certificate
£ 476.00
Price excl. VAT &. delivery
ISO Calibration

With the humidity detector it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The humidity detector offers features such as average value, maximum, minimum, and hold functions at a reasonable price.

  • Internal probe
  • Temperature: -20°C … 60°C / -4 … 140°F
  • Relative humidity: 10 … 90% r.H.
  • Temperature of global: -22°C … 60°C / -8 … 140°F
  • Humidity: -68°C … 60°C / -90 … 140°F
  • Dew point temperature: depending on the sensor

  • External probe
  • Temperature: -50° C … 500° C / -58 … 932°F

  • incl. ISO Calibration Certificate