Humidity Detector

Order no.: PCE-HMM 100

The Humidity Detector PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The Humidity Detector features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The Humidity Detector PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The humidity detector PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The humidity detector is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330-ICA

PCE-330 is a handheld humidity detector or hygro-thermometer with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MMK 1

PCE-MMK 1 is a portable digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction handheld humidity detector also measures ambient temperature and ambient relative humidity.


Measuring ranges:
- Wood, paper, textiles: 1 ... 75% moisture
- Concrete, building materials: 0.1 ... 2.4% moisture
- Ambient temperature: -40 ... 70°C / -40 ... 158°F
- Ambient relative humidity (RH): 0 ... 100 % RH

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HGP

PCE-HGP is a multifunction moisture tester for wood that uses penetrating pins to measure the moisture content of wood and other construction or building materials. PCE-HGP also measures the relative humidity (RH) and ambient temperature and calculates the dew point temperature of the air.


- Material moisture measuring range: 6% ... 60%
- RH measuring range: 0% ... 100%
- Air temp. measuring range:  -5 ... 50ºC / 23 ... 122ºF
- Dew point temp. measuring range: -9 ... 50ºC / 16 ... 122ºF
- Measures 3 wood groups (12 types + 270 exotic types)  

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WM1

PCE-WM1 is a multi-function handheld humidity detector used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


- Temperature range: -20 ... 80°C
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1

Humidity detector to measure relative humidity and temperature visible from up to 50 m distance. The humidity meter is composed of a 100mm high LED and comes with IP54 rating. Celcius only temperature display.

- Measurement ranges relative humidity / temperature: 10 to 95% r.h. / 0 to 60  °C
- Resolution relative humidity / temperature: 1% r.h. / 1 °C
- Accuracy relative humidity / temperature: ±2% r.h. / 1 °C
- Display: 100 mm high LED (alternates values)
- Protection: IP 54 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G1A

PCE-G1A is a humidity detector with a large display. This IP54-rated wall-mountable device measures both relative humidity (%RH) and temperature (°C only). The PCE-G1A humidity detector has a large LED display with a number height of 100 mm / 3.9 in, so measurement values can be seen at a distance of up to 50 m / 164 in away. Celcius only temperature display.


- Measurement ranges relative humidity / temperature: 10 ... 95% RH / 0 ... 60°C
- Resolution relative humidity / temperature: 1% RH / 1°C
- Accuracy relative humidity / temperature: ±2% RH / 1°C
- 2-channel analog output of 4 ... 20-mA
- Display: 100 mm / 3.9 in tall LED digits (alternates values) 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT110-ICA

The PCE-HT110-ICA Datalogging Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110-ICA is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-780

The Multi-function Humidity Detector PCE-780 consists of an infrared thermometer and an integrated humidity meter. With the two sensors, it can record values to determine the dew point. If this dew point is reached or undershot, there is a risk of moisture settling and thus of mould.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-780-ICA

The humidity detector PCE-780A is a dual-function instrument used to measure both temperature and humidity. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

- Infrared measurement range: -76 ... 932°F / -60 ... 500°C
- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: MSR145-

This thumb-sized Swiss Quality MSR145 Humidity Detector records over 2 000 000 measured values - with an optional microSD card, even over a billion measured values - and is ideal for long-term measurements. It is capable of simultaneously measuring and recording a variety of measures such as temperature, humidity, pressure, 3-axis acceleration and light.


- Possible parameters: temperature, humidity, pressure, 3-axis acceleration and
  light
- Data logger records over 2,000,000 data with an optional microSD card, even
  over a billion values
- Parameters, housings, ext. sensors selectable (Configurator)
- USB-interface

Manufacturer: MSR Electronics GmbH
Test Instruments manufacturer
Order no.: MSR145WD-

Wireless monitoring of measurement data and rapid reading of measured values – this ease of use is offered by the new MSR145WD wireless Humidity Detector. The Humidity Detector is equipped with Bluetooth Low Energy, a bright OLED graphic display and the optional web-based service MSR SmartCloud for data monitoring from any location.


- Bluetooth Low Energy (Bluetooth 4.0 Smart) 2.4 GHz
- Radio range: approx. 10 m / 33 ft
- Communication with multiple MSR145WD data loggers possible
- Alarm function, transmission to MSR SmartCloud
- Free smartphone app (Android, iPhone 4S+, iPad 3+)
- Compatible with Windows or Linux PC (Bluetooth dongle available)
- Sturdy BLE receiver box available as gateway
- Parameters, sensors, etc. can be selected (Configurator)

 

Manufacturer: MSR Electronics GmbH
Test Instruments manufacturer
Order no.: PCE-HMM 25

The Humidity Detector PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The Humidity Detector features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The Humidity Detector PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 25 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 50

The Humidity Detector PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The Humidity Detector features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The Humidity Detector PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RH-2

The Humidity Detector RH-2 can measure various parameters with selectable sensors for relative and absolute air humidity, temperature, dewpoint, as well as water activity. The equilibrium moisture content of the thermal dewpoint calculator indicates the relative ambient humidity, which the material has an equilibration with, and thus is unable to absorb or to emit any more humidity. The absolute humidity of the humidity detector detects the percentage of water content based on gross weight of the material.


- Very fast matching behavior
- Long-term stable sensors (sensors optional)
- Easy storage of measured values
- Documentation of the measurement
- Multilingual menu navigation

** Sensors not included - see Accessories tab for options**

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: PCE-HMM 270

The Humidity Detector PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The Humidity Detector features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The Humidity Detector PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 270 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: MSR165-

The bestseller for transportation monitoring, fault diagnoses and load tests! The robust MSR165 Humidity Detector is capable of making 1600 acceleration (shock, vibrations) measurements per second in all three axes. Shock monitoring with this Humidity Detector is possible up to ±15 g or up to ±200 g, 32 measurement values are recorded even before the event takes place.


- Possible test parameters: temperature, humidity, pressure, 3-axis acceleration
  and light
- Measurement/storage rate: up to 1600/s
- The logger records over 2 000 000 measured data - with an optional microSD
  card, even over a billion
- Parameters, sensors, etc. can be selected (Configurator)

Manufacturer: MSR Electronics GmbH
Test Instruments manufacturer