Gas Detector / Gas Detection Instrument

Gas Detector PCE-AQD 50
£ 356.00
Price excl. VAT &. delivery
Topseller

The gas detector is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The gas detector is equipped with various sensors.

Parameters / Measuring ranges:

  • Temperature: 0 … +50 ºC / 32 … 122 ºF
  • Ambient humidity: 0 … 100% RH
  • Atmospheric pressure: 300 … 2000 hPa
  • CO2: 0 … 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months

Gas Detector PCE-AQD 10
£ 405.00
Price excl. VAT &. delivery
The gas detector PCE-AQD 10 is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor from the gas detector is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% rh
  • Measuring range: 0 … 50°C / 32 … 122°F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
Gas Detector PCE-RCM 12
£ 416.00
Price excl. VAT &. delivery
The gas detector PCE-RCM 12 is used for indicative testing of environmental parameters. The gas detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the gas detector provides information about these parameters. 


  • Fine dust, CO2, formaldehyde, humidity, temperature
  • Particle size channels: PM 2.5 / PM 10
  • Temperature measuring range: -20 … 70°C / -4 … 158°F
  • Humidity measuring range: 0 … 100% r.H.
  • Formaldehyde measuring range: 0.00 … 5.00 mg/m³
  • CO2 measuring range: 0 … 9999 ppm
  • For indicative measurements
Gas Detector PCE-WMM 50
£ 435.00
Price excl. VAT &. delivery

PCE-WMM 50 is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)

Gas Detector / Gas Detection Instrument PCE-AQD 50A-ICA incl. ISO-Calibration Certificate
£ 445.00
Price excl. VAT &. delivery
ISO Calibration
The Gas Detector / Gas Detection Instrument is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Gas Detector / Gas Detection Instrument is equipped with various sensors.
Parameters / Measuring ranges:

  • Temperature: 0 ... +50 ºC / 32 ... 122 ºF
  • Ambient humidity: 0 ... 100% RH
  • Atmospheric pressure: 300 ... 2000 hPa
  • CO2: 0 ... 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months
  • incl. ISO-Calibration Certificate
Gas Detector PCE-AQD 10-ICA incl. ISO Calibration Certificate
£ 505.00
Price excl. VAT &. delivery
ISO Calibration
The gas detector is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the gas detector is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% RH
  • Measuring range: 0 … 50 °C / 32 … 122 °F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
  • incl. ISO Calibration Certificate (for CO2 only)
Gas Detector PCE-WMM 50-ICA incl. ISO Calibration Certificate
£ 529.00
Price excl. VAT &. delivery
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Gas Detector PCE-AQD 20
£ 691.00
Price excl. VAT &. delivery
The gas detector PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The PCE-AQD 20 health and gas detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
Gas Detector PCE-WMM 100
£ 711.00
Price excl. VAT &. delivery

The gas detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm