The Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range. Furthermore, the Gas Detector has sensor heads for other gases available, which are automatically recognized when plugged into the device. Thus, you can use the Gas Detector in many different areas. The possibilities of the Gas Detector extend the use of ozone in your processes for bleaching oils, greases, wax, paper, synthetic fibers, cellulose or textiles,within the paper, textile, or lubricant production industries. Another field of application for the Gas Detector is in cleaning, disinfection and sterilisation of swimming pools, water treatment facilities or after fire damage or water damage. With a head for lower measurements of up to 0.150 ppm, you can measure ozone concentrations that have a negative effect on the mental state of humans.
Thanks to the leading GSS technology of the sensors, the Gas Detector is not only high precision, but also has a long lifespan. The unique possibility to refresh the sensors makes their maintenance more economical than the maintenance of other types of sensors. Depending on the model, the measured concentrations may be written to the internal memory of the Gas Detector via an analog interface with a 0... 5 V output, or the output is transferred via a USB interface to a PC. Similarly, a remote kit is available as an option, allowing the Gas Detector to take measurements in a secure room while the sensor is connected via cable to the Gas Detector. Through simplicity of operation the alarm thresholds for the optical or acoustic signal can be changed in a very short time. In addition to the measured concentrations in the LCD display, which are displayed in ppm or mg / m³, the high and low alarms are shown.
|Digital output||RS232 with USB converter|
|Data Logger||8188 values|
|PC transfer||Software and data cable included|
|Model 200, 300 and 500 Series|
|Power supply||12 V DC|
|Rechargeable battery||Lithium-Polymer 12 V DC / 2700 mAh|
|Charger||12.6V 2 A|
|Charging time||2... 3 hours|
|Lifecycle||> 500 charges|
|Housing||PC & ABS / IP20 & NEMA 1|
|Dimensions (incl. opt. sensorsavailable)||7.7 x 4.8 x 2.1 in / 195 x 122 x 54 mm|
|Weight||< 1 lb / 460 g (with battery)|
|Approvals||EN 50082-1: 1997, EN 50081-1: 1992, CE|
1 x Formaldehyde Meter AQ-500 Set EF
1 x 12V DC 800 mA AC/DC Power Supply Unit
1 x Battery pack 12V
1 x Software und data cable (USB)
1 x Operating instructions.