Hotline

Technical advice

Monday - Friday
8.00am - 4.00pm

023 8098 7035

Would you like a product presentation via Skype?
Send us an email:

Force Gauge PCE-FM 200

Order no.: PCE-FM 200

Question / Callback

Delivery time: 1-2 working days

Force Gauge PCE-FM 200

Force gauge for tensile force measurement and pressure force measurement up to 200 N

USB interface and downloadable evaluation software for data transmission / Many measuring adapters

The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge can determine the units N, kg and lb. The scope of delivery of the PCE-FM 200 force gauge includes various adapters with different shapes. These can be screwed onto the device and thus offer the optimum solution for differently designed surfaces in the measurement of pressure and tension. In addition to the adapters, an extension rod is also supplied, which allows measurements in hard to reach places. This extension rod has a length of 65 millimeters. The scope of delivery of the PCE-FM 200 force gauge includes flat head adapter, hook adapter, ball head adapter, chisel head adapter and a notched head adapter, whereby the hook adapter is used for tensile force measurements.

The PCE-FM 200 force gauge offers the option of mounting the force gauge on a test stand by means of threads on the rear of the device. Test stands are always used in a force gauge if reproducible measurement results are required during the force measurement. These test stands are ideal additions to a force gauge, because they are operated by a precise handwheel or a motor. In addition, both tensile and compressive force measurements can be performed on them. Experiments in the laboratory are thus possible with the force gauge as well as the inspection of incoming goods.

Attention: The internal load cell is maintenance-free, light and characterized by extremely long service life. For the production of this load cell only high quality materials are used, which guarantee maximum safety and longevity. The force gauge has an overload range. If you exceed this, you destroy the internal load cell. So if you select a force gauge for your application, then for safety's sake move to the next higher model at the measuring range.

- Differently shaped measuring adapters

- Downloadable evaluation software

- Device for mounting on test stands

- Peak measurement

- Power supply via charging adapter

- Delivery includes extension rod

- Evaluation via USB interface

- Fast display of measured value

Measuring range	2 ... 200 N / 0.2 ... 20 kg / 0.4 ... 45 lbs
Resolution	0.1 N / 0.02 lbs
Pressure calibration	1 Mpa
Load cell	Integrated load cell with M6 connection
Measuring range	1 ... 100% of the full scale
Measurement accuracy	±0.5%
Units	n, kg, lb
Display	LCD
Operating temperature	10 ... 30°C / 50 ... 86°F
Relative humidity	15 ... 80%
Working conditions	The device must not be located near sources of vibration or corrosive substances
Weight	1 kg / 2.2 lb

1 x Force Gauge PCE-FM 200

1 x Downloadable evaluation software

1 x Flathead adapter

1 x Hook adapter

1 x Ball head adapter

1 x Chisel head adapter

1 x Notch head adapter

1 x Adapter for extension rod

1 x Extension rod (65 mm / 2.55")

1 x USB cable

1 x Charging adapter (240 V)

1 x Equipment case

1 x Operation manual

man-force-gauge-pce-fm-200-pce-fm-50n-pce-fm-500n-en-1149704.pdf

man-software-pce-fm-200-en_1225757.pdf

datasheet-pce-fm-200-1579451.pdf

Accessories

Double handle PCE-DHFG 500 for force gauges

Double handle PCE-DHFG 500 for force gauges

Order no.: PCE-DHFG 500

Double handle PCE-DHFG 500 for force gauges

Double handle for force measuring devices with internal force measuring cell up to 500N

N.B. Force gauge not included in delivery.

Manufacturer: PCE Instruments

£ 89.00

Price excl. VAT &. delivery
2 year Warranty

Thread reducer PCE-SJJM10M6

Thread reducer PCE-SJJM10M6

Order no.: PCE-SJJM10M6

Thread reducer PCE-SJJM10M6

Thread reducer for SJJ accessories and force gauges / test stands

- Thread connection: M10 to M6
- External thread: M10
- Internal thread: M6

Catalogue: Measuring Instruments / Test Meters / Test Stand

Manufacturer: Markus Wrobel

£ 10.00

Price excl. VAT &. delivery
2 year Warranty

Force Test Stand PCE-FTS50

Force Test Stand PCE-FTS50

Order no.: PCE-FTS50

Force Test Stand PCE-FTS50

Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.

- with digital measuring distance display
- max. range of force 500 N
- maximum operating length of 236.36 mm / 9.30"
- the mounting plate ADP-UNI must be ordered at the same time!

Catalogue: Measuring Instruments / Test Meters / Test Stand

Manufacturer: PCE Instruments

£ 378.00

Price excl. VAT &. delivery
2 year Warranty

man-teststand-pce-fts-50-de.pdf

Force gauge test stand LTS-20

Force gauge test stand LTS-20

Order no.: LTS-20

Force gauge test stand LTS-20

LTS-20 Force Gauge Test Stand is designed to be used in combination with either the PCE-DFG series, PCE-FM series or PCE-PTR. The Test Stand offers the ideal solution for measuring traction and compression, and guarantees precise correspondence between the test matrix and the test position.

- Maximum usable length: 345 mm
- Total length: 530 mm (without hand wheel)
- Hand wheel diameter: 120 mm
- Maximum range of force: 1000 N / 100 kg / 220 lbs
- the mounting plate ADP-UNI must be ordered at the same time!

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 529.00

Price excl. VAT &. delivery
2 year Warranty

manual-force-gauge-test-stand-lts-20.pdf

datasheet-force-gauge-test-stand-lts20.pdf

Hand grip KG-LTS-20

Hand grip KG-LTS-20

Order no.: KG-LTS-20

Hand grip KG-LTS-20

Hand grip as a wedge for the PCE-FM 50/200 device. The hand grip can be fixed at the top of the device. [more]

Manufacturer: PCE Instruments

£ 35.00

Price excl. VAT &. delivery
2 year Warranty

Mounting adapter for test stand FG-ADP

Mounting adapter for test stand FG-ADP

Order no.: FG-ADP

Mounting adapter for test stand FG-ADP

Mounting plate for adapting the load cell of the PCE-FM1000 to the test stand LTS-20.

Catalogue: Measuring Instruments / Test Meters / Test Stand

Manufacturer: WEVO GmbH

£ 54.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ01 Adapters for Pressure Tests

PCE-SJJ01 Adapters for Pressure Tests

Order no.: PCE-SJJ01

PCE-SJJ01 Adapters for Pressure Tests

Adapter for pressure force testing of sponge, foam glass, rock material, etc.

- Max. capacity: 5 kN / 5,000 N / 1,124 lbs
- Diameter: 16 mm
- Threaded connection: M10

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 53.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ02 Adapter Ring for Tensile Tests

PCE-SJJ02 Adapter Ring for Tensile Tests

Order no.: PCE-SJJ02

PCE-SJJ02 Adapter Ring for Tensile Tests

Adapter ring for tensile tests. Diameter is 20 mm and capacity is 0.5 kN / 500 N / 112.4 lbs.

- Useful for tension test of springs or wires
- M6 threaded connection

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 53.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ03 Clamping Device for Test Stand

PCE-SJJ03 Clamping Device for Test Stand

Order no.: PCE-SJJ03

PCE-SJJ03 Clamping Device for Test Stand

Clamping device for tensile tests of rubber, wires and cables, paper, plastic film, etc.

- Capacity 500 N / 112.4 lbs
- Max. opening size 3 mm

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 53.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ04 Adapter Stamp Round for Pressure Tests

PCE-SJJ04 Adapter Stamp Round for Pressure Tests

Order no.: PCE-SJJ04

PCE-SJJ04 Adapter Stamp Round for Pressure Tests

Adapter-stamp for pressure force test of spring and sponge etc.

- Max. Capacity: 3 kN / 3,000 N / 674 lbs
- Diameter: 50 mm
- Threaded connection: M10

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 53.00

Price excl. VAT &. delivery
2 year Warranty

Clamp Jaw PCE-SJJ05 for Teststand PCE-FTS50 and PCE-SH 500

Clamp Jaw PCE-SJJ05 for Teststand PCE-FTS50 and PCE-SH 500

Order no.: PCE-SJJ05

Clamp Jaw PCE-SJJ05 for Teststand PCE-FTS50 and PCE-SH 500

Clamping device with large opening width for pull test of fabric, paper, leather and rubber.

- Capacity 5000 N / 1,124 lbs
- Material is iron

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ06 Adapter Clamps for Tensile Tests

PCE-SJJ06 Adapter Clamps for Tensile Tests

Order no.: PCE-SJJ06

PCE-SJJ06 Adapter Clamps for Tensile Tests

Adapter clamps for tensile testing of wire and filaments.

- Max. capacity: 5 kN / 5,000 N / 1,124 lbs
- Threaded connection: M10

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Clamping Device for Tensile Tests PCE-SJJ07

Clamping Device for Tensile Tests PCE-SJJ07

Order no.: PCE-SJJ07

Clamping Device for Tensile Tests PCE-SJJ07

Use clamping device for tensile testing of electronic parts, wires, etc.

- Max. Capacity: 500 N / 112 lbs
- Opening max: 2.5 mm

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Clamping Tool for Tensile Tests PCE-SJJ08

Clamping Tool for Tensile Tests PCE-SJJ08

Order no.: PCE-SJJ08

Clamping Tool for Tensile Tests PCE-SJJ08

Use clamping pliers for tensile tests of electronic components, wires, etc.

- Max. Capacity: 1000 N / 225 lbs
- Opening max: 20 mm

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ09 Fork Holder for Tensile and Compression Tests

PCE-SJJ09 Fork Holder for Tensile and Compression Tests

Order no.: PCE-SJJ09

PCE-SJJ09 Fork Holder for Tensile and Compression Tests

Fork holder for tensile and pressure tests.

- Max. capacity: 5 kN / 5,000 N / 1124 lbs
- Threaded connection: M10

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Adapter Clamp For Tensile Tests PCE-SJJ010

Adapter Clamp For Tensile Tests PCE-SJJ010

Order no.: PCE-SJJ010

Adapter Clamp For Tensile Tests PCE-SJJ010

Adapter clamp for tensile tests.

- Max. Capacity: 500 N / 112 lbs
- Opening max: 8 mm

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Clamp Jaw PCE-SJJ11 for Teststand

Clamp Jaw PCE-SJJ11 for Teststand

Order no.: PCE-SJJ011

Clamp Jaw PCE-SJJ11 for Teststand

Clamping device with large opening width for pull or push test of cable, rigid material or electronic components.

- Capacity 5000 N / 1,124 lbs
- Material is iron
- Opening is 4 mm
- M10 threaded connection

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ012 Tensioning Device for Tensile Tests

PCE-SJJ012 Tensioning Device for Tensile Tests

Order no.: PCE-SJJ012

PCE-SJJ012 Tensioning Device for Tensile Tests

Tensioning device for tensile tests.

- Max. capacity: 0.2 kN / 200 N / 45 lbs
- Max. opening: 3 mm
- Threaded connection: M10

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Clamp Jaw PCE-SJJ013 for Test stand

Clamp Jaw PCE-SJJ013 for Test stand

Order no.: PCE-SJJ013

Clamp Jaw PCE-SJJ013 for Test stand

Clamping device with large opening width for pull or push test of block, glass, and board type materials components.

- Capacity 5000 N / 1,124 lbs
- Material is iron
- Opening is 5 mm
- M10 threaded connection

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ015 Clamping Device for Test Stand

PCE-SJJ015 Clamping Device for Test Stand

Order no.: PCE-SJJ015

PCE-SJJ015 Clamping Device for Test Stand

Clamping device with large opening width for peel test of block, glass and cardboard.

- Capacity 5000 N / 1,124 lbs
- Max. opening 33 mm / 1.29 in
- M10 threaded connection

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 116.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ017 Universal Clamping Device

PCE-SJJ017 Universal Clamping Device

Order no.: PCE-SJJ017

PCE-SJJ017 Universal Clamping Device

Universal clamping device for tensile tests of rubber, sheet metal, bales, etc.

- Max. capacity: 5 kN / 5,000 N / 1,124 lbs
- Opening max: 4 mm
- Threaded connection: M10

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 472.00

Price excl. VAT &. delivery
2 year Warranty

Clamping Device for Testing Bristles PCE-SJJ020

Clamping Device for Testing Bristles PCE-SJJ020

Order no.: PCE-SJJ020

Clamping Device for Testing Bristles PCE-SJJ020

Clamping device for testing bristles.

- Max. Capacity: 500 N / 112 lbs

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

PCE-SJJ024 Clamping Device for Test Stand

PCE-SJJ024 Clamping Device for Test Stand

Order no.: PCE-SJJ024

PCE-SJJ024 Clamping Device for Test Stand

Clamping device with soft jaws for tension testing of paper, film etc.

- Capacity 500 N / 112.4 lbs
- Diameter: 6 mm
- Aluminum material

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 178.00

Price excl. VAT &. delivery
2 year Warranty

Clamping Device for Testing Bristles PCE-SJJ029

Clamping Device for Testing Bristles PCE-SJJ029

Order no.: PCE-SJJ029

Clamping Device for Testing Bristles PCE-SJJ029

Clamping device for testing bristles.

- Max. Capacity: 500 N / 112 lbs

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Holder for Button and Rivet Testing PCE-SJJ032

Holder for Button and Rivet Testing PCE-SJJ032

Order no.: PCE-SJJ032

Holder for Button and Rivet Testing PCE-SJJ032

Holder for knob and rivet test.

- Max. Capacity: 500 N / 112 lbs

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Pliers for Trigger Tests PCE-SJJ035

Pliers for Trigger Tests PCE-SJJ035

Order no.: PCE-SJJ035

Pliers for Trigger Tests PCE-SJJ035

Pliers for trigger tests.

- Max. Capacity: 500 N / 112 lbs
- Opening max: 37 mm

Catalogue: Measuring Instruments / Test Meters / Force Gauge / Digital Force Gauge

Manufacturer: PCE Instruments

£ 107.00

Price excl. VAT &. delivery
2 year Warranty

Adapter Plate for Force Test Stand ADP-UNI

Adapter Plate for Force Test Stand ADP-UNI

Order no.: ADP-UNI

Adapter Plate for Force Test Stand ADP-UNI

Adapter plate for mounting the PCE-FM50, PCE-FM200, PCE-SH 500 and PCE-SH 2K force gauge transducers to the PCE-FTS50, PCE-MTS50 and PCE-MTS 500 motorized test stand.

Manufacturer: WEVO GmbH

£ 62.00

Price excl. VAT &. delivery
2 year Warranty